Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings Problems in popular cars

Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem is a common vehicle problem that happens to most car brands and models. The following is a sample list of Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems reported in most popular vehicles.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Chevrolet Silverado

The vehicle involved was a 1999 Chevrolet Silverado. The vehicle's vehicle identification number (VIN) was 1GCEK19T8X_. When brake pedal was depressed pedal went all way to the floor. Dealer has been contacted for problem, and stated that brake vacuum hose was deffective. Please provide further details. It was 09/09/00 when this power assist brake vacuum hoses, lines/piping, and fittings issue occurred.

See all problems of Chevrolet Silverado and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Chevrolet Silverado.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Chevrolet Malibu

The car was a 1998 Chevrolet Malibu. Brakes failed. This power assist brake vacuum hoses, lines/piping, and fittings problem happened on Mar. 9, 2003.

See all problems of Chevrolet Malibu and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Chevrolet Malibu.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Chrysler Cirrus

The vehicle involved is a 1999 Chrysler Cirrus. While driving the brake vacuum hose completely came off, causing total brake failure. Consumer applied the emergency parking brake to stop the vehicle.

See all problems of Chrysler Cirrus and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Chrysler Cirrus.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Dodge Stratus

The vehicle involved is a 2000 Dodge Stratus. Vehicle is experiencing the same as in recall number 00 v 196 000 for the brake hose, but vehicle VIN is not included. Ph. This power assist brake vacuum hoses, lines/piping, and fittings issue occurred Feb. 5, 2002.

See all problems of Dodge Stratus and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Dodge Stratus.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Dodge Sprinter

2007 Dodge Sprinter 2500 had no brakes. Consumer wants to know how can an automobile have absolutely no driver warning device to advise the driver that he has no brakes. The consumer stated the problem was a melted vacuum hose. It was Tue., Jan. 1, 1901 when this power assist brake vacuum hoses, lines/piping, and fittings issue happened.

See all problems of Dodge Sprinter and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Dodge Sprinter.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Ford F-250

The car involved is a 2005 Ford F-250 sd. The vacuum hubs on a Ford f250 are stuck in the lock position. Makes truck jump from one side of the road to the next. I have to fight the steering wheel to stay in my lane. It started only when I turn sharp it would stick then brake free after a I stop , and now I can't even drive without going from lane to lane. Bought new hubs that are not vacuum hubs ones that are 100% manual. It was Monday, May. 11, 2009 when this power assist brake vacuum hoses, lines/piping, and fittings issue occurred.

See all problems of Ford F-250 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Ford F-250.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Ford F-250

The vehicle was a 2005 Ford F-250. 2005 Ford f250. Problem with the brake booster the consumer stated he has the same problem as the f150's that are being recalled, but Ford advised him his model was not being recalled. The failure date was Tuesday, January 1, 1901.

See all problems of Ford F-250 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Ford F-250.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of GMC Sierra 1500

Consumer has a 2000 GMC Sierra 1500. The contact was driving 30 mph when the abs light illuminated. When depressed, the brakes would fall much farther into the floorboard than usual. The dealer replaced the speed sensor yet the abs warning light illuminated immediately following repairs. The dealer then advised that the failure could be caused by a faulty valve or module. The manufacturer would not provide any assistance. The vehicle was not further repaired. The failure mileage was 80,000. The consumer stated he spent over $3000 on the brake module and brake lines which were rusted. Updated 12/22/10. It was Sat., May. 15, 2010 when this power assist brake vacuum hoses, lines/piping, and fittings issue occurred.

See all problems of GMC Sierra 1500 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of GMC Sierra 1500.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of GMC Envoy

The vehicle having this issue was a 2002 GMC Envoy. While operating vehicle at about 75 mph in fast lane vehicle lost power, almost causing an accident. Loss of engine power/ steering power, and once vehicle came to a stop. Dashboard illumination showed brake check valve defect.

See all problems of GMC Envoy and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of GMC Envoy.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Honda Civic

The vehicle involved was a 1996 Honda Civic. Crash happened when the problem occurred. Vehicle identification number (VIN): 1HGEJ6502T_. Brake booster vacuum hose failed, causing brake failure/accident. This issue happened on Wednesday, April 17, 1996.

See all problems of Honda Civic and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Honda Civic.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Honda Civic

The car was a 1996 Honda Civic. Crash happened when the problem occurred. Loss of power assist check valve, causing the consumer to have a accident prior to recall 96v106000. This power assist brake vacuum hoses, lines/piping, and fittings problem happened on 07/23/96.

See all problems of Honda Civic and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Honda Civic.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Land Rover Freelander

The vehicle was a 2002 Land Rover Freelander. The 2002 Freelander s I own has very poor brakes. At 12000 miles or so I took the vehicle in for some other problems and was told the brakes had to be replaced. I want to note that Land Rover compensated me for the cost of the brake pads because there were other front end problems. Today I took my Freelander in and the dealership gave me an identical 2003 Freelander. The brakes were somewhat better and the Freelander had 11000 miles. I am hoping the dealership can fix this problem. I also have had several instances where the car lurched forward on its own. I thought it was my driving until I saw other entries on this site. One other item is that my 2002 Freelander a/c blower is very loud. I noticed that the 2003 Freelander I am driving today the blower is somewhat normal. The speakers in my and two other landrover Freelanders are vibrating due to the lack on insulation in the door frames. It was 07/16/02 when this power assist brake vacuum hoses, lines/piping, and fittings issue occurred.

See all problems of Land Rover Freelander and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Land Rover Freelander.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Lexus RX330

Crash was involved with this problem. On January 17, 2005 I was involved in an automobile accident in my 2004 Lexus Rx330. This accident occurred less than 1 mile from my home, on my own street, 1-2 minutes after leaving my home. It had snowed the night before and the roadway was still snow/ice covered, it was a frigid morning. I was traveling approximately 15 miles per hour and the vehicle brakes failed to engage. I attempted to push the brake petal to the floor without result. The anti-lock brakes did not function. The damage to this vehicle exceeded $8000. Days after the damage to the vehicle was fixed my husband took the vehicle to the Lexus of towson dealership to have the braking mechanism looked at. During the drive to the dealership (in similar, snow covered/frigid conditions) my husband was able to reproduce this problem, again just after leaving our home. The dealership (a 40 minute drive from our home) was unable to reproduce this problem and told us to call back if the problem occurred again. Today, may 24, 2005, we were informed during a routine oil change that there may be a problem wth the brakes and that a campaign was underway to investigate. I wanted to formally add my vehicle to this list of compaints. It was 01/17/05 when this power assist brake vacuum hoses, lines/piping, and fittings issue occurred.

See all problems of Lexus RX330 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Lexus RX330.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Mercedes Benz ML320

The vehicle involved is a 2000 Mercedes Benz Ml320. The vehicle's vehicle identification number (VIN) was 4JGAB54E0Y_. Loss of brake fluid resulting in brake failure caused by rupture of corroded metal hydraulic brake line as confirmed by local mercedes dealer (hollaway motor cars-manchester-nh). Hollaway also confirmed same failure and cause on 2 other same model vehicles. The failure date was Dec. 28, 2007.

See all problems of Mercedes Benz ML320 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Mercedes Benz ML320.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Mercedes Benz E Class

The car is a 2003 Mercedes Benz E Class. After receiving NHTSA recall 04v296000 made contact with the dealer. Consumer was told that vehicle could not be serviced until January 2005. It was November 17, 2004 when this power assist brake vacuum hoses, lines/piping, and fittings issue occurred.

See all problems of Mercedes Benz E Class and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Mercedes Benz E Class.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Mercury Sable

The vehicle was a 1996 Mercury Sable. The VIN of this vehicle was 1MELM58S6T_. Brake vaccum line broke, resulting in collision. However, the airbag did not deploy on contact. This issue happened on 02/16/99.

See all problems of Mercury Sable and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Mercury Sable.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Mercury Mystique

The vehicle involved is a 1997 Mercury Mystique. The vehicle's vehicle identification number (VIN) was 1MELM6536V_. Booster vacuum line broke, causing power brakes to fail. It was 06/11/1997 when this power assist brake vacuum hoses, lines/piping, and fittings issue happened.

See all problems of Mercury Mystique and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Mercury Mystique.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Mitsubishi Montero Sport

The car is a 2000 Mitsubishi Montero Sport. The VIN of the problem Montero Sport is GAMT41RXYP_. Consumer received recall 01v027000 on brake vacuum hoses . Dealership stated that parts were not available to repair defect, and did not know when they would receive parts. Also, brakes were beginning to make squeaking noises. Dealer checked brakes and stated the squeaking noise had nothing to do with the recall. It was March 1, 2001 when this power assist brake vacuum hoses, lines/piping, and fittings issue occurred.

See all problems of Mitsubishi Montero Sport and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Mitsubishi Montero Sport.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Mitsubishi Montero

The vehicle identification number (VIN) of this Mitsubishi Montero is JA4MW51R92_. 2002 Mitsubishi Montero developed noise under the left side dash. * the vehicle was taken to a local dealer where it was discovered that the brake accumulator had failed. After some research the consumer found that a recall had been issued on the 2001-2002 Montero for this problem. According to the manufacturer the consumer's vehicle did not fall in the recall range. The consumer believes the vehicle should be covered under the recall since it exhibits the same failure. This power assist brake vacuum hoses, lines/piping, and fittings problem happened on Monday, October 9, 2006.

See all problems of Mitsubishi Montero and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Mitsubishi Montero.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of SAAB 9-3

The vehicle involved was a 2004 SAAB 9-3. The vehicle's vehicle identification number (VIN) was YS3FD79Y24_. Recall notice from SAAB regarding defective brakes. Dealer doesn't have parts to fix. SAAB says there is nothing they can do. This problem occurred on Saturday, March 27, 2004.

See all problems of SAAB 9-3 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of SAAB 9-3.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of SAAB 9-3

The car involved was a 2004 SAAB 9-3. VIN of the vehicle was YS3FB49SX4_. SAAB with defective brakes customer wants to be reimbursed for the whole cost of repairs the consumer stated the brake booster valve can fail prematurely. The brakes worked only with extreme hard pressure. Goodyear informed the consumer the part that was being replaced on the brakes was recalled. The manufacturer only reimbursed the consumer $46. 00 for the actual part. This power assist brake vacuum hoses, lines/piping, and fittings issue occurred 12/01/2006.

See all problems of SAAB 9-3 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of SAAB 9-3.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Saturn SKY

The vehicle's vehicle identification number (VIN) is 1G8MF35XX8_. 2008 Saturn Sky redline convertible-brake problem when the car has been sitting for a couple of hours without use, the brakes fail to work after initially starting the vehicle. According to the manufacturer, this is "normal" and cannot be fixed. It takes a good 2-3 minutes for the brakes to work after the car starts. This issue happened on 11/29/07.

See all problems of Saturn SKY and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Saturn SKY.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Subaru Outback

VIN of the vehicle was 4S3BG6859V_. Crash was involved with the Subaru Outback. Problems with brake equipment on 1997 Subaru Outback. The brakes failed to stop, resulting in the consumer rear ended the vehicle in front. Moisture was found in the hose which resulted in the valve freezing due to cold temperature, blocking off the vacuum to the power brake unit. This problem occurred on Jan. 21, 2004.

See all problems of Subaru Outback and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Subaru Outback.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Toyota RAV4

The vehicle is a 2007 Toyota Rav4. All 2007 Rav4 v6 engines like mine purchased new have a whistling/whining noise at idle, especially when cold out due to more air intake needed, from the brakes vacuum booster lines very noticeable when at idle at initial cold startup when applying brakes off and on. I have even heard this same loud whistling noise coming from in front of the instrument panel when accelerating from a stop sign in very cold (below 32 degrees) weather which is all due to the vacuum lines/check valve in the brakes vacuum system. Dealer is aware of the problem and have no resolution except to file a complaint with Toyota rep. To address this issue. All new 07 Rav4 v6 owners need to complain to their dealers about this issue for they will not repair this annoying loud whistling noise in the brakes vacuum booster lines without 100's of complaints. Also, I have read several complaints about the cruise control flooring the engine up even a slight hill and shifting in and out of gears repeatedly like it does not know what gear the engine should be in. Even with my 268 hp v6, it will do this and is not only annoying, but is a distraction and possible safety issue in slippery winter driving since the cruise control floors the engine up a hill and can cause swerving on icy roads. Speak up consumers, and let Toyota know they have issues which I am 100% correct on!. The failure date was Mon., Oct. 15, 2007.

See all problems of Toyota RAV4 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Toyota RAV4.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Toyota Echo

The vehicle involved is a 2000 Toyota Echo. There was crash involved with this problem. The vehicle's vehicle identification number (VIN) is JTBDBT123X_. Consumer had an accident that resulted because dealer did not repair recalled item in timely manner. Over three months ago, dealer said they would notify consumer when parts arrived, still has not received call. It was Dec. 17, 2000 when this power assist brake vacuum hoses, lines/piping, and fittings issue happened.

See all problems of Toyota Echo and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Toyota Echo.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Volkswagen Passat

The car involved is a 2006 Volkswagen Passat. At the red light, engine started to vibrate. When the light changed to green, my wife decided to pull over to see what happened. She realized that the brakes stopped working. From 20 mph it took a whole block to stop. Luckily, no one was in front of her. Car was towed away to the dealer. As per service: vacuum hose broke off from the engine and we lost power braking. Engine vibration is the symptom. Only 9500 miles on the car. Dealer told me its a common problem on new Passats. This power assist brake vacuum hoses, lines/piping, and fittings problem happened on October 13, 2006.

See all problems of Volkswagen Passat and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Volkswagen Passat.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Volkswagen Passat

The car involved was a 2006 Volkswagen Passat. VIN of the vehicle was WVWAK73C56_. 2/5 noon: as I was pulling out of my apartment complex on to a main road, my brakes went out. Fortunately, I was going 10 mph so was able to come to a stop simply by letting off the gas and pushing the wheel against a curb. Engine began to misfire and emi came on. 12: in my attempt to reach vw roadside assistance, I was put on automated hold for over 25 minutes. 12: I called the general customer service line and at that point was told that there was a recall on my vehicle regarding vacuum hose to the brake lines but that should not have resulted in total brake failure. Re-directed me to roadside assistance again. 12: placed on automated hold with roadside assistance for 15+ minutes again and at that point began looking for alternative options. 1: received a call from third party moc roadside assistance confirming somebody was on their way to pick me up and should be there within the hour. 2: car was dropped off at tom wood volkswagon of indianapolis, in. I was given a rental car for the next few days. 2/9 went to get my car. They had fixed the problem and had no explanation why I didn't receive a recall letter. They said the recall had been made public 26 December 2005 and that I should check my mailing address with vag (ironic how all my financing statements come on time though!). There was a recall on the wiper system issued at the same time (also of which I was not notified). When they performed this recall at this time also, they returned the car to me w/o the wipers functioning! I was outraged that they didn't check the wiper system before telling me it was o. K. It took them a few minutes to get the wipers going and I was on my way. It wasn'tt doing any good to speak to the dealership and have begun to consult lawyers regarding actions against vag due to the fact that I was not made aware of this safety recall. Suffering: mental anguish, fear of unsafe car, lost productivity at work. This power assist brake vacuum hoses, lines/piping, and fittings problem happened on February 5, 2007.

See all problems of Volkswagen Passat and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Volkswagen Passat.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Volvo S40

The owner has a 2002 Volvo S40. The contact stated that the brakes were applied while reversing and the pedal traveled to the floorboard abnormally. The contact took the vehicle to a local mechanic where the mechanic advised that there was a crack in the master cylinder. The master cylinder was replaced however, the failure recurred while in reverse. The mechanic was contacted a second time who advised the contact of NHTSA campaign id number: 04v493000 (service brakes, hydraulic:power assist:vacuum:hoses, lines/piping, and fittings) and informed the contact to call a dealer. The contact called the dealer regarding the recall but the dealer stated that the VIN was not included. The vehicle was not further repaired. The failure mileage was 150,000. Updated 10/04/11 the consumer stated he was experiencing problems with the brakes on his vehicle. When he backed out of the driveway, the brake pedal would sink to the floor. When the vehicle was put in drive, the vehicle continued to roll when the brakes were applied. Initially, the consumer was informed there was a crack in the master cylinder, which was replaced. After the replacement, the same problem occurred, the consumer took the vehicle back to the repair shop and was then informed, there was a recall for the brake vacuum pump. The consumer called the dealer and was informed there was a recall. However, his VIN was not included. Updated 10/05/11. This issue happened on Wednesday, August 24, 2011.

See all problems of Volvo S40 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Volvo S40.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Volvo S70

The vehicle is a 1998 Volvo S70. The vehicle identification number (VIN) is YV1LS534XW_. A piece of the vacuum brake system came loose, causing engine to increase its rpms spontaneously and locke dup the brakes, resulting in loss of control. It was Saturday, August 16, 1997 when this power assist brake vacuum hoses, lines/piping, and fittings issue happened.

See all problems of Volvo S70 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Volvo S70.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Audi S4

The vehicle was a 2002 Audi S4. The vehicle identification number (VIN) is WAURD68D92_. The brakes boost/vacuum assist line check valve cracks apart into two pieces. This causes the total loss of the power assisted brake system in the car and subsequently makes it very hard to stop the vehicle. There is no warning about the pending loss of brakes. One second you have brakes the next it feels like you are trying to push a brick thru the floor of the vehicle trying to get it to stop. This issue happened on Monday, August 14, 2006.

See all problems of Audi S4 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Audi S4.

car   Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problem of Audi A6

The car is a 1998 Audi A6. Brake booster vacuum can not completed due to lack of parts. Nlm.

See all problems of Audi A6 and all Power Assist Brake Vacuum Hoses, Lines/piping, And Fittings problems of Audi A6.