Engine And Engine Cooling Related Problems of the 2016 Acura MDX

Table 1 shows eight common engine and engine cooling related problems of the 2016 Acura MDX. The number one most common problem is related to the engine and engine cooling (150 problems). The second most common problem is related to the car stall (four problems).


Recently reported Engine And Engine Cooling problems of the 2016 Acura MDX

The Engine And Engine Cooling problem

"vehicle experienced a sudden flashing check engine light pulled over checked oil restarted car flashing check engine light went away then started flashing again a few miles down the road (cylinder 3 misfire) accompanied by severe engine knocking. The engine locked up/seized while hot.   Read details...

The Car Stall problem

My 2016 Mdx has a fuel pump failure which has caused my Mdx to stall and led to problems with my fuel injectors. There is a recall but my Acura dealer refuses to honor it. On 10/18 my wife was driving the car on the free way and it slowed to a stall. This is a known issue.   Read details...

The Engine Belts And Pulleys problem

Found #4 cylinder misfire - metal contamination spun a bearing internally inside the engine. Recommend replacing the engine. See quotes below: recommend at the same time as the engine replacement - starter, timing belt, spark plugs, and valve.   Read details...


Engine And Engine Cooling related problems in other Acura MDX model year vehicles:



MDX Service Bulletins
MDX Safety Recalls
MDX Defect Investigations