Structure Related Problems of the 2002 Acura RSX

Table 1 shows three common structure related problems of the 2002 Acura RSX. The number one most common problem is related to the bumper (two problems). The second most common problem is related to the frame and members (one problem).

Table 1. Structure related problems of Acura RSX

Problem Category Number of Problems
Bumper problems
2
Frame And Members problems
1
Structure problems
1

Recently reported Structure problems of the 2002 Acura RSX

The Bumper problem

Bumper not flushed nor aligned, unlike the left rear end. Bumper paint failing due to improper mounting of the rear bumper. As a result, bumper rubs against the rear signal lights causing the paint to fall/chip.   Read details...

The Frame And Members problem

*open body seam at drivers a-pillar. I reported this problem twice as suspension noise which I though was the problem; dealer found no problem with the suspension. A few months went by and I realized the noise was coming from the driver side specially when turning wheels all the way to the left.   Read details...

The Structure problem

Acura Rsx: radiator and condenser have absolutely no protection (grill) in this model. The Rsx is very susceptible to road debris damaging the condenser and radiator rendering the car inoperative, due to overheating and rapid loss of radiator fluid. This is especially true at highway speeds.   Read details...


Structure related problems in other Acura RSX model year vehicles:



Fuel Economy of RSX Vehicles
RSX Service Bulletins
RSX Safety Recalls