Table 1 shows one common forward collision avoidance related problems of the 2018 Buick Enclave.
| Problem Category | Number of Problems |
|---|---|
| Automatic Emergency Braking problems |
The brake system abs module/sensor malfunctions- yes it is available for further inspection. Safety is an issue due to the abs indicator light on. Yes, the problem/issue has been confirmed by a dealership. No inspections have occurred other than the dealership. The only warning is the light indicator for the brakes, parking abs.
Passenger side rear electronic parking brake wire clip failed, wire is rubbing against the rear cv boot. This caused a short that led to defective abs control module that had to be replaced for anti-skid and anti-roll for this SUV. It also affected the transmission alert system. Related bulletins: https://s3. Amazonaws. Com/shop-ware-prod-attachments/2ce2615fbf6158c020eb7ddbba19c956d5c9cf33. Pdf?1678982217 https://s3. Amazonaws. Com/shop-ware-prod-attachments/df15af6513bb2265bc07179efd733f06e355fe8a. Pdf?1678916531 from shop: "continued working with the electronic parking brake system used gm techline connect to attempt to reprogram the ebcm because of the programming error dtc. After programming we also performed the module configuration procedure and although e removed the programming error, the system is still reporting a failure with the left parking brake circuit. All circuits have been checked. The current hypothesis is that the electronic brake control module (ebcm) has failed internally. This likely occurred when the actuator wiring became exposed and allowed the wiring to short together. : https://s3. Amazonaws. Com/shop-ware-prod-attachments/d0edde862ec36d33b013087e9934f74892154a13. Pdf?1678995379.