Two problems related to car stall have been reported for the 2006 Chevrolet Corvette. The most recently reported issues are listed below. Please also check out the statistics and reliability analysis of the 2006 Chevrolet Corvette based on all problems reported for the 2006 Corvette.
Cylinder head valve guides worn requiring replacement before warranty expiration. If not repaired catastrophic motor failure can occur. If this happens car becomes uncontrollable with oil and coolant flooding out of motor. New heads were ordered from the factory and they were out of specification and needed modification before installed. Previous 2008 Corvette (unknown VIN but can be found at dealership where serviced had this same problem leading to the above mentioned failure and uncontrolled vehicle condition. This happened on an offload venue so there was no accident report. I don not know the exact dates but entered a date as required below.
I was concerned about a noise that I was hearing in my 2006 z06 that is unlike any other noise I have heard while currently owning my three other gm vehicles. I decided to bring it to a well know Corvette speciality shop near me. The told me about the valve guide issue that has been linked to the ls7 heads. I immediately told him to take the heads off the car and check them. I had 4 exhaust valves that were way out of gm specs. I had the heads re-machined properly and installed new intake and exhaust valve guides, valve springs and seals.