Assist problems of the 2020 Hyundai Palisade

"the front view camera (fr_cmr) failed due to an internal control chip defect. The component is available for inspection — it is currently at the dealership. Multiple adas safety systems were simultaneously disabled, including forward collision-avoidance assist, lane departure warning, lane keep assist, driver attention warning, and high beam assist. This puts both the driver and other road users at risk by removing all active collision prevention and lane keeping systems while driving at highway speeds with no backup warning. The problem has been confirmed by the Hyundai dealership via gds diagnostic scan showing two dtcs: c160649 (ecu software error – front view camera) and c180581 (lkas can signal error). The vehicle has been inspected by the dealer. Dealer repair order quotes $1,511. 87 for camera replacement and calibration. Warning lights for forward collision, driver attention warning, and high beam assist appeared on the instrument cluster and have remained on continuously. Systems have been disabled since the warning lights first appeared. This is a known internal control chip defect documented in kia TSB ele231 (rev 2, August 2021), covering the identical camera assembly shared across the Hyundai/kia platform. The same dtcs and same fix — front camera replacement, variant coding, and calibration — are confirmed repaired on other 2020 Palisade limited vehicles under warranty. Hyundai has not issued a corresponding TSB for the Palisade despite the identical failure mode and shared part. VIN: [xxx] . " information redacted pursuant to the freedom of information act (foia), 5 u. S. C. 552(b)(6).