Automatic Emergency Braking problems of the 2023 Kia Motor Telluride

After a recall on the emergency braking system was resolved, we’ve had frequent occurrences where the rear cross traffic alert system will report traffic that does not exist. The vehicle will then stop abruptly. Once this happens, the emergency brake doesn’t always completely disengage. This almost always happens in parking lots and can increase the likelihood of accidents. I’ve taken it to the dealership, but they’ve been able to replicate the issue.

After driving through snow and letting my Telluride sit in the garage for a few days before driving it again, when I put the vehicle in drive and attempted to leave my garage there was a loud clunking noise and the vehicle didn't move for several seconds. I have also noticed that the automatic emergency brake will engage if the vehicle is in neutral and the driver's side door is open. How would you be able to load the vehicle on a flatbed truck if it was in an accident? a.

Every time this issue happens, all the safety warnings are going off on my dashboard, telling me to check each safety feature and that it's currently not working. 1 - check awd/4wd 2 - check blind spot safety system 3 - check tire pressure monitoring system 4 - check Smart crusie control system 5 - check forward side safety system 6 - check rear cross traffic safety system 7 - check lane following assist system 8 - check lane change assist function 9 - check lane safety system 10 - check speed limit system 11-check high beam assist system 12 - check inattentive driving warning system 13 - check door system 14 - check truck lift gate system - all going off while I also lose mph and turn signal capability and cameras.

The reverse camera remains engaged even after shifting to drive. This can remain after 10-20 seconds. As I started to drive forward, the camera remained engaged and hit on moving cars behind me causing the vehicle to emergency brake even though nothing was in front of me. Almost causing an accident.