Front Suspension Control Arm Problems of Mercedes Benz 280

Mercedes Benz 280 owners have reported 1 problem related to front suspension control arm (under the suspension category). The most recently reported issues are listed below.

1 Front Suspension Control Arm problem of the 1995 Mercedes Benz 280

Failure Date: 01/15/2014

The lower control arm on the passenger side where the the ball joint is attached broke detaching the wheel and causing the tire to collapse. A mercedes-benz specialist in my area who repairs only mercedes-benz advised me that this is all too common with this series of mercedes-benz has ranging from 1994 to 1998 in both c class and e class vehicles. The repair shop that replaced the control arm was also surprised on how thin the sheet metal control arm is where the ball joint mounting is welded onto the sheet metal. Over time rust forms on the inside of the sheet metal which is hollow. Two weeks later the same repair shop had another customer come in with the same problem on a 1998 mercedes-benz. Mercedes-benz has never made a recoil, and does not acknowledge that there is a problem with this series of vehicles. Which in reality is a very common problem with these vehicles.


Other Common Suspension related problems of Mercedes Benz 280

Problem Category Number of Problems
Front Suspension problems
1
Front Suspension Control Arm problems
1


280 Service Bulletins
280 Safety Recalls
280 Defect Investigations