Engine And Engine Cooling Problems of Mercedes Benz Metris

Mercedes Benz Metris owners have reported 23 engine and engine cooling related problems since 1996. Table 1 shows the 4 most common engine and engine cooling problems. The number one most common problem is related to the vehicle's engine and engine cooling (17 problems). The second most common problem is related to the vehicle's crankcase (pcv) (4 problems). For details of each of the problem category, use the links in the table.

Table 1. Engine And Engine Cooling related problems of Mercedes Benz Metris


Recently reported Engine And Engine Cooling problems of Mercedes Benz Metris

The Engine And Engine Cooling problem

My 2019 mercedes-benz Metris, with approximately 78,000 miles, developed a check-engine light and diagnostic code p052e/p052e71 for a failure involving the positive crankcase ventilation/crankcase ventilation regulator system.   Read details...

The Crankcase (pcv) problem

A check engine light on a mercedes-benz Metris, accompanied by a p052e code, often indicates a problem with the positive crankcase ventilation (pcv) system, specifically the pcv regulator valve or its associated components.   Read details...

The Engine Crank/camshaft Position Sensor problem

The contact owns a 2016 mercedes-benz Metris. The contact stated that while operating the vehicle, the check engine warning light remained illuminated. The vehicle was taken to the local dealer who diagnosed that the crank case ventilation valve had failed and needed to be replaced.   Read details...

The Check Engine Light On problem

Check engine light checked and diagnostic code p052e71 showed that the valve for crankcase ventilation has a malfunction. The actuator is blocked, p06da00 the actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.   Read details...




☘ Metris Service Bulletins
☤ Metris Defect Investigations