There have been 4 safety recalls for the BMW F650 Cs. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the BMW F650 Cs.
The flange could become brittle, crack, and allow fuel to escape from the fuel tank. Fuel leakage, in the presence of an ignition source, could result in a fire.
| Recalled Vehicles: 2003 BMW F650 Cs, 2004 BMW F650 Cs |
| Component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
| Recall Summary: On certain motorcycles, the plastic fuel pump flange could come into contact with a sufficient amount of acid or chemical compounds containing acidic elements, such as battery acid or certain cleaning products. ... Details of this recall 🔎 |
Over time, the splines could be damaged to the extent that the output shaft would not longer operate the drive belt, resulting in a loss of drive capability at the rear wheel.
| Recalled Vehicles: 2003 BMW F650 Cs |
| Component: WHEELS:LUGS/NUTS/BOLTS |
| Recall Summary: On certain motorcycles, it is possible that the hex nut that secures the wheel to the gearbox output shaft was tightened incorrectly during the vehicle assembly. As a result, the nut could loosen during vehicle operation.... Details of this recall 🔎 |
This would result in a loss of drive capability at the rear wheel, increasing the risk of a crash.
| Recalled Vehicles: 2003 BMW F650 Cs |
| Component: WHEELS |
| Recall Summary: On certain motorcycles, due to a manufacturing defect, it is possible that the wheel could develop a crack. Over time, the crack could worsen to the point that the wheel failed and the drive belt derailed. ... Details of this recall 🔎 |
If the caliper becomes trapped between the rear wheel and the swing arm, it could disconnect from the brake line, resulting in a loss of rear braking capability and increasing the risk of a crash.
| Recalled Vehicles: 2003 BMW F650 Cs |
| Component: SERVICE BRAKES, HYDRAULIC |
| Recall Summary: On certain motorcycles, the screws that attach the rear brake caliper to the rear swing arm were not tightened correctly during assembly. The screws could loosen during vehicle operation and eventually fall-out, allowing the rear caliper to separate from its mount. ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| May. 19, 2004 | Fuel System, Gasoline:delivery:fuel Pump | 1,560 |
| Jul. 23, 2002 | Wheel | 576 |
| Jul. 23, 2002 | Wheels:lugs/nuts/bolts | 577 |
| May. 20, 2002 | Service Brakes | 522 |
| Model | # Recalls |
|---|---|
| 2004 BMW F650 Cs | 1 |
| 2003 BMW F650 Cs | 4 |