There have been 7 safety recalls for the Ducati 916. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the Ducati 916.
This condition could cause the spindle to fail affecting the control of the motorcycle, and could result in a crash.
| Recalled Vehicles: 1997 Ducati 748, 1998 Ducati 748BIP, 1999 Ducati 748BIP, 1998 Ducati 748L, 1998 Ducati 748MONO, 1999 Ducati 748MONO, 1994 Ducati 916, 1995 Ducati 916, 1996 Ducati 916, 1997 Ducati 916, 1997 Ducati 916BIP, 1998 Ducati 916BIP, 1998 Ducati 916MONO, 1996 Ducati 955SP, 1999 Ducati 996BIP, 1997 Ducati 996SPS, 1998 Ducati 996SPS |
| Component: WHEELS:CENTER SECTION |
| Recall Summary: Vehicle description: motorcycles equipped with a rear wheel hub spindle. Internal cracks may be present on the rear wheel spindle. ... Details of this recall 🔎 |
Fuel leakage in the presence of an ignition source can result in a fire.
| Recalled Vehicles: 1998 Ducati 748, 1998 Ducati 916, 1998 Ducati 916SPS, 1998 Ducati ST2 |
| Component: FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS |
| Recall Summary: Vehicle description: motorcycles. The fuel lines inside the fuel tank can leak. ... Details of this recall 🔎 |
This condition can cause increased braking effort.
| Recalled Vehicles: 1994 Ducati 916 |
| Component: WHEELS |
| Recall Summary: Vehicle description: motorcycles. The rear wheel spindle will need to be replaced and the roller bearing and seals of the eccentric hub lubricated. ... Details of this recall 🔎 |
The engine may not return to proper idle.
| Recalled Vehicles: 1994 Ducati 916, 1995 Ducati 916, 1996 Ducati 916 |
| Component: VEHICLE SPEED CONTROL |
| Recall Summary: Vehicle description: motorcycles. The throttle control linkage pin was not lubricated properly. ... Details of this recall 🔎 |
This condition can cause the accelerator to stick open partially, increasing the potential for a vehicle accident.
| Recalled Vehicles: 1995 Ducati 916 |
| Component: VEHICLE SPEED CONTROL |
| Recall Summary: The teflon bushing for the throttle cable can slide out of the throttle cable housing. ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Dec. 23, 1999 | Wheels:center Section | 4,165 |
| Mar. 11, 1999 | Fuel System, Gasoline:delivery:hoses, Lines/piping, And Fittings | 793 |
| Dec. 8, 1997 | Vehicle Speed Control | 1,316 |
| Dec. 8, 1997 | Wheel | 649 |
| Aug. 4, 1995 | Vehicle Speed Control | 1,000 |
| May. 26, 1995 | Service Brakes, Hydraulic:foundation Components:disc | 209 |
| Apr. 3, 1995 | Unknown Or Other | 600 |
| Model | # Recalls |
|---|---|
| 1998 Ducati 916 | 1 |
| 1997 Ducati 916 | 1 |
| 1996 Ducati 916 | 2 |
| 1995 Ducati 916 | 5 |
| 1994 Ducati 916 | 3 |