There have been 11 safety recalls for the Ford E100. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the Ford E100.
Consequence of defect: this sticking could result in a faster speed than intended, possibly resutling in an accident.
| Recalled Vehicles: 1984 Ford Bronco, 1984 Ford Club Wagon, 1984 Ford E100, 1984 Ford E150, 1984 Ford E250, 1984 Ford E350, 1984 Ford Econoline, 1984 Ford F100, 1984 Ford F150, 1984 Ford F250, 1984 Ford F350, 1984 Ford Mustang, 1984 Mercury Capri |
| Component: FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM |
| Recall Summary: The secondary throttle shaft may, with accumulated mileage, become contaminated and may stick in a partially open position while driving. ... Details of this recall 🔎 |
| Recalled Vehicles: 1982 Ford Club Wagon, 1982 Ford E100, 1982 Ford E150, 1982 Ford E250, 1982 Ford E350, 1982 Ford Econoline |
| Component: POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT |
| Recall Summary: On some of the involved vehicles, the shift rod in the transmission may not be properly seated in the retention grommet of the steering column shift lever assembly. If the shift rod were to disengage, the driver could not select the proper transmission function which would create the potential for ... Details of this recall 🔎 |
| Recalled Vehicles: 1980 Ford Club Wagon, 1980 Ford E100, 1980 Ford E150, 1980 Ford Econoline |
| Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
| Recall Summary: Certain vehicles were equipped with front brake hose assemblies that were incorrectly manufactured by the supplier. These assemblies, both rh and lh, were incorrectly built with the fittings misoriented by 90 degrees.... Details of this recall 🔎 |
| Recalled Vehicles: 1980 Ford E100, 1980 Ford E150, 1980 Ford E250 |
| Component: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM |
| Recall Summary: Due to computer input error which resulted in an incorrect build schedule, some vehicles were shipped without the required exhaust system heat shields. When the vehicle is idled over an extended period of time, a missing exhaust heat shield may result in dangerously high floor pan temperatures. ... Details of this recall 🔎 |
| Recalled Vehicles: 1979 Ford Bronco, 1979 Ford Club Wagon, 1979 Ford E100, 1979 Ford E150, 1979 Ford Econoline, 1979 Ford F100, 1979 Ford F150 |
| Component: WHEELS |
| Recall Summary: The wheel assembly may contain substandard welds in the area where the disc is attached to the rim. As a result, cracks can form in the wheel assembly, causing air loss and an underinflated tire. ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Oct. 2, 1984 | Fuel System, Gasoline:carburetor System | 85,000 |
| Jan. 13, 1982 | Power Train:automatic Transmission:lever And Linkage:column Shift | 378 |
| Sep. 19, 1980 | Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings | 10,000 |
| Jul. 14, 1980 | Engine And Engine Cooling:exhaust System | 4 |
| Aug. 7, 1979 | Wheel | 22,500 |
| Jun. 19, 1979 | Structure: Frame And Members:underbody Shields | 12,000 |
| May. 15, 1979 | Service Brakes, Hydraulic:pedals And Linkages | 82,000 |
| Oct. 5, 1978 | Seat Belts:rear | 874 |
| Nov. 15, 1977 | Fuel System, Gasoline:carburetor System | 30,000 |
| Oct. 25, 1977 | Power Train:automatic Transmission:lever And Linkage:column Shift | 19,000 |
| Oct. 18, 1976 | Steering:gear Box (other Than Rack And Pinion) | 53,137 |
| Model | # Recalls |
|---|---|
| 1984 Ford E100 | 1 |
| 1982 Ford E100 | 1 |
| 1980 Ford E100 | 2 |
| 1979 Ford E100 | 4 |
| 1978 Ford E100 | 2 |
| 1976 Ford E100 | 1 |