There have been 3 safety recalls for the International 9100I. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the International 9100I.
This chafing could cause an electrical short and/or fire.
| Recalled Vehicles: 2003 International 9100I, 2004 International 9100I, 2005 International 9100I, 2006 International 9100I, 2003 International 9200I, 2004 International 9200I, 2005 International 9200I, 2006 International 9200I, 2003 International 9400I, 2004 International 9400I, 2005 International 9400I, 2006 International 9400I, 2003 International 9900I, 2004 International 9900I, 2005 International 9900I, 2006 International 9900I |
| Component: ELECTRICAL SYSTEM:BATTERY:CABLES |
| Recall Summary: On certain 4x2 and 6x4 heavy duty trucks, the positive battery cable between the batteries and the starter may rub against an electrical ground cable between the starter and frame rail. ... Details of this recall 🔎 |
if the terminal breaks off, the cab will lose all power, resulting in complete electrical failure and engine shutdown, which may result in a crash and potentially cause property damage, personal injury, or death.
| Recalled Vehicles: 2002 International 9100I, 2003 International 9100I, 2003 International 9200I, 2002 International 9400I, 2003 International 9400I, 2002 International 9900I, 2003 International 9900I |
| Component: ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR |
| Recall Summary: On certain heavy duty trucks built with a detroit engine and a leece neville alternator. The electrical terminal at the alternator end of the cable that runs from the starter to the battery stud on the alternator may break off, due to vibration in the cable. ... Details of this recall 🔎 |
This movement could cause individual brake components to fail or eventually fatigue all the anchor plate mounting bolts. If all the bolts break due to failure, a complete loss of braking at a wheel end could occur.
| Recalled Vehicles: 2003 International 9100I, 2003 International 9200I, 2003 International 9400I, 2003 International 9900I |
| Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
| Recall Summary: On certain heavy duty trucks, the bolts and locking nuts used to hold the brake spiders or brake anchor plates tight to the axles were under-torqued on the right side of the vehicles. If the clamp load on the bolts is not sufficient, the anchor plate may move when the brake is applied in either the ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Jun. 24, 2005 | Electrical System:battery:cables | 49,607 |
| Mar. 6, 2003 | Electrical System:alternator/generator/regulator | 881 |
| Nov. 15, 2002 | Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings | 252 |
| Model | # Recalls |
|---|---|
| 2006 International 9100I | 1 |
| 2005 International 9100I | 1 |
| 2004 International 9100I | 1 |
| 2003 International 9100I | 3 |
| 2002 International 9100I | 1 |