There have been 4 safety recalls for the International Harvester 2574. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the International Harvester 2574.
This locking tab prevents the wheel bearing nut from loosening during vehicle operation. If this tab is deformed, the nut can loosen allowing the wheel to separate from the axle increasing the risk of a vehicle accident.
| Recalled Vehicles: 1996 International Harvester 2574, 1997 International Harvester 2574, 1997 International Harvester 2654, 1997 International Harvester 2674, 1997 International Harvester 4700, 1997 International Harvester 4800, 1997 International Harvester 4900, 1997 International Harvester 5000, 1997 International Harvester 8100, 1997 International Harvester 8200, 1997 International Harvester 9200, 1997 International Harvester 9300, 1997 International Harvester 9400, 1997 International Harvester 9800 |
| Component: SUSPENSION:REAR |
| Recall Summary: The drive axle housings consist of a plate steel center section and two forged spindles, one of which is welded to each end of the center section. Each spindle contains a keyway slot in which the locking tab for the wheel bearing nut locking mechanism is inserted.... Details of this recall 🔎 |
Vehicles are subject to vehicle tilt and possible rollover in the event that both equalizing beams, on the same side of the vehicle, experience a simultaneous shaft failure. Affected suspensions can also drop and contact the road surface generating sparks which could ignite flammable material.
| Recalled Vehicles: 1996 International Harvester 2574, 1996 International Harvester 5000, 1996 International Harvester 9200, 1996 International Harvester 9300, 1996 International Harvester 9400, 1996 International Harvester 9600 |
| Component: SUSPENSION |
| Recall Summary: The equalizing beam shaft of the tandem axle suspension were manufactured from as-rolled sae4140 steel rather than the specified annealed sae4140. These shafts can fracture inside the beam at the toe of the weld. ... Details of this recall 🔎 |
This can cause loss of speed control, driver distraction, and result in an accident.
| Recalled Vehicles: 1994 International Harvester 2574, 1995 International Harvester 2574, 1994 International Harvester 2674, 1995 International Harvester 2674, 1994 International Harvester 3600, 1995 International Harvester 3600, 1994 International Harvester 4700, 1995 International Harvester 4700, 1994 International Harvester 8100, 1995 International Harvester 8100, 1994 International Harvester 8200, 1995 International Harvester 8200 |
| Component: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL |
| Recall Summary: The base of the electronic accelerator pedal is made of die cast aluminum. The base mounts directly to the cab firewall. The cab firewall is not rigid enough or flat enough at the mounting surface, causing stress on the accelerator base that will cause the mounting pads on the base of the pedal ... Details of this recall 🔎 |
If an inappropriate gear is selected without the driver's knowledge, the vehicle will react differently than expected, possibly resulting in injury or crash.
| Recalled Vehicles: 2000 International 9900I, 2000 International Harvester 2574, 2000 International Harvester 8100, 2000 International Harvester 9100I, 2000 International Harvester 9200I, 2000 International Harvester 9400I |
| Component: POWER TRAIN:AUTOMATIC TRANSMISSION |
| Recall Summary: Vehicle description: heavy duty trucks equipped with eaton autoshift gen ii transmission assemblies. Due to a software problem in the transmission assemblies, the transmission will select the wrong gear. ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Jun. 6, 2000 | Power Train:automatic Transmission | 223 |
| Nov. 22, 1996 | Suspension:rear | 1,133 |
| Aug. 1, 1996 | Suspension | 21 |
| Oct. 7, 1994 | Vehicle Speed Control:accelerator Pedal | 6,449 |
| Model | # Recalls |
|---|---|
| 2000 International Harvester 2574 | 1 |
| 1997 International Harvester 2574 | 1 |
| 1996 International Harvester 2574 | 2 |
| 1995 International Harvester 2574 | 1 |
| 1994 International Harvester 2574 | 1 |