There have been 4 safety recalls for the Isuzu I Mark. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the Isuzu I Mark.
This condition can allow water/oil mixture to build upin the hose from the oil separator to the air inlet duct. After the engine isstopped, this water/oil mixture can, under cold weather conditions, freeze andcompletely block the oil separator air duct hose. This blockage will result inincreased pressure within the crankcase. This can cause oil leaks. If asufficient quantity of oil came in contact with the hot exhaust system an enginecompartment fire could result without prior warning.
| Recalled Vehicles: 1987 Isuzu I Mark, 1988 Isuzu I Mark |
| Component: ENGINE AND ENGINE COOLING:ENGINE |
| Recall Summary: The positive crankcase ventilation valve may provide inadequate air flow under low engine load conditions. ... Details of this recall 🔎 |
This condition could allow fuel to leak from the fueltank and ultimately result in a fire without prior warning. Such a fire couldspread to the passenger compartment.
| Recalled Vehicles: 1987 Isuzu I Mark, 1988 Isuzu I Mark |
| Component: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY |
| Recall Summary: Perforation of the fuel tank or attached fuel feed pipe due to corrosion of the tank or fuel feed pipe materials. ... Details of this recall 🔎 |
A perforated diaphragm can allow fuel to leak from thefuel pump into the underhood area. This could ultimately result in anunderhood fire without prior warning. Such a fire could spread to thepassenger compartment.
| Recalled Vehicles: 1985 Isuzu I Mark, 1986 Isuzu I Mark |
| Component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
| Recall Summary: Vehicle may experience perforation of the fuel pump diaphragm. Excessive alcohol content in the fuel promotes degradation of the diaphragm coating resulting in radial cracking of the diaphragm. ... Details of this recall 🔎 |
| Recalled Vehicles: 1983 Isuzu I Mark |
| Component: STEERING:COLUMN |
| Recall Summary: The tilt steering wheel lock mechanism that holds the steering wheel in place may break. Failure of the locking mechanism would allow the steering wheel to tilt, unrestrained. The wheel may travel to the high or low position. ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Mar. 28, 1988 | Fuel System, Gasoline:storage:tank Assembly | 2,090 |
| Mar. 28, 1988 | Engine And Engine Cooling:engine | 2,483 |
| May. 27, 1987 | Fuel System, Gasoline:delivery:fuel Pump | 28,509 |
| Apr. 29, 1983 | Steering:column | 4,938 |
| Model | # Recalls |
|---|---|
| 1988 Isuzu I Mark | 2 |
| 1987 Isuzu I Mark | 2 |
| 1986 Isuzu I Mark | 1 |
| 1985 Isuzu I Mark | 1 |
| 1983 Isuzu I Mark | 1 |