There have been 3 safety recalls for the Mack MS250. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the Mack MS250.
This could affect steering control and result in anaccident.
| Recalled Vehicles: 1988 Mack MS200, 1989 Mack MS200, 1990 Mack MS200, 1988 Mack MS250, 1989 Mack MS250, 1990 Mack MS250, 1988 Mack MS300, 1989 Mack MS300, 1990 Mack MS300 |
| Component: STEERING:RACK AND PINION |
| Recall Summary: Capscrew that attaches steering gear to the steering bracket may loosen and cause the gear to separate from its supporting bracket. ... Details of this recall 🔎 |
This could affect steering control and result in anaccident.
| Recalled Vehicles: 1989 Mack MS250, 1990 Mack MS250, 1989 Mack MS300, 1990 Mack MS300 |
| Component: STEERING:RACK AND PINION |
| Recall Summary: Capscrew that attaches steering gear to the steering bracket may loosen and cause the gear to separate from its supporting bracket. ... Details of this recall 🔎 |
| Recalled Vehicles: 1985 Mack Cs 200, 1986 Mack Cs 200, 1985 Mack Cs 250, 1986 Mack Cs 250, 1985 Mack MS200, 1986 Mack MS200, 1985 Mack MS250, 1986 Mack MS250 |
| Component: VEHICLE SPEED CONTROL |
| Recall Summary: The sealant used on the injection pump could penetrate through the bushing and get between the throttle shaft and bushings causing the shaft to bind. Consequence of defect: throttle shaft seizure may cause the engine to stay on full throttle, and result in loss of operator control and ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Aug. 1, 1990 | Steering:rack And Pinion | 2,135 |
| Aug. 1, 1990 | Steering:rack And Pinion | 1,770 |
| May. 27, 1986 | Vehicle Speed Control | 830 |
| Model | # Recalls |
|---|---|
| 1990 Mack MS250 | 2 |
| 1989 Mack MS250 | 2 |
| 1988 Mack MS250 | 1 |
| 1986 Mack MS250 | 1 |
| 1985 Mack MS250 | 1 |