All vehicles » Mack » U Series

  Safety Recalls of Mack U Series Vehicles

There have been 10 safety recalls for the Mack U Series. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the Mack U Series.

NHTSA Recall #: 89V086000; May. 22, 1989

Recalled Vehicles: 1988 Mack CH, 1989 Mack CH, 1988 Mack Dm Series, 1989 Mack Dm Series, 1988 Mack R Series, 1989 Mack R Series, 1988 Mack Rd Series, 1989 Mack Rd Series, 1988 Mack U Series, 1989 Mack U Series
Component: STEERING:WHEEL AND HANDLE BAR
Recall Summary: Steering wheel retaining nuts may have been improperly installed and/or torqued. ... Details of this recall 🔎

NHTSA Recall #: 89V032000; Mar. 3, 1989

Under certain conditions, hose could fail resulting inloss of power steering assist and possibly an accident.

Recalled Vehicles: 1987 Mack Dm Series, 1988 Mack Dm Series, 1987 Mack Dmm Series, 1988 Mack Dmm Series, 1987 Mack R Series, 1988 Mack R Series, 1987 Mack Rd Series, 1988 Mack Rd Series, 1987 Mack Rm Series, 1988 Mack Rm Series, 1987 Mack Rw Series, 1988 Mack Rw Series, 1987 Mack U Series, 1988 Mack U Series
Component: STEERING:HYDRAULIC POWER ASSIST:HOSE, PIPING, AND CONNECTIONS
Recall Summary: An incorrect high pressure power steering hose may have been installed. ... Details of this recall 🔎

NHTSA Recall #: 88V125000; Jul. 27, 1988

This would allow the pitman arm to come off the steeringgear sector shaft and result in immediate loss of steering control and a vehiclecrash could occur.

Recalled Vehicles: 1988 Mack Dm Series, 1988 Mack Dmm Series, 1988 Mack R Series, 1988 Mack Rd Series, 1988 Mack Rm Series, 1988 Mack U Series
Component: STEERING:LINKAGES
Recall Summary: Some of the nuts/bolts used to fasten the steering pitman arm may loosen. ... Details of this recall 🔎

NHTSA Recall #: 88V085000; May. 23, 1988

If clamp plate breaks, yoke would fly off at detachedpoint and could injury anyone struck by flying fragments. Also, the detachedinner shaft could interfere with the brake system air supply hoses and tractortires, which could result in loss of truck control and an accident.

Recalled Vehicles: 1988 Mack Dm Series, 1988 Mack Dmm Series, 1988 Mack R Series, 1988 Mack Rd Series, 1988 Mack Rm Series, 1988 Mack U Series
Component: POWER TRAIN:DRIVELINE:CENTER SUPPORT BEARING
Recall Summary: Clamp plates used between the drive shaft and carrier yokes may crack and could break due to improper heat treatment. ... Details of this recall 🔎

NHTSA Recall #: 87V179000; Nov. 23, 1987

Such failure could cause loss of truck control withoutprior warning and result in a crash.

Recalled Vehicles: 1987 Mack CF, 1987 Mack Dm Series, 1987 Mack MH, 1987 Mack Mr Series, 1987 Mack Rd Series, 1987 Mack Rs Series, 1987 Mack Rw Series, 1987 Mack U Series
Component: STEERING:LINKAGES
Recall Summary: Cross steering levers may be improperly heat treated and subject to fail during normal operation. ... Details of this recall 🔎

Table 1. Historical Recalls of Mack U Series Vehicles

Date Component Vehicle Affected
May. 22, 1989   Steering:wheel And Handle Bar 16,000
Mar. 3, 1989   Steering:hydraulic Power Assist:hose, Piping, And Connections 3,127
Jul. 27, 1988   Steering:linkages 6,400
May. 23, 1988   Power Train:driveline:center Support Bearing 203
Nov. 23, 1987   Steering:linkages 323
Mar. 22, 1984   Steering:wheel And Handle Bar 4,393
Mar. 2, 1982   Steering:wheel And Handle Bar 22
Jul. 8, 1981   Service Brakes, Air:controls:hand Control 10,000
May. 6, 1980   Parking Brake:driveline:air 9,666
May. 6, 1980   Steering:gear Box (other Than Rack And Pinion) 109


Table 2. Recall Statistics of Mack U Series Model Years

Model# Recalls
1989 Mack U Series 1
1988 Mack U Series 4
1987 Mack U Series 2
1984 Mack U Series 1
1983 Mack U Series 1
1982 Mack U Series 1
1981 Mack U Series 1
1980 Mack U Series 4
1979 Mack U Series 3
1978 Mack U Series 1
1977 Mack U Series 1
1976 Mack U Series 1