There have been 7 safety recalls for the Navistar 9300. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the Navistar 9300.
This fatigue cracking can result in wheel separation, increasing the risk of a crash.
| Recalled Vehicles: 1996 Navistar 9200, 1997 Navistar 9200, 1998 Navistar 9200, 1996 Navistar 9300, 1997 Navistar 9300, 1998 Navistar 9300, 1996 Navistar 9400, 1997 Navistar 9400, 1998 Navistar 9400, 1996 Navistar 9800, 1997 Navistar 9800, 1998 Navistar 9800 |
| Component: SUSPENSION:FRONT:HUB |
| Recall Summary: Vehicle description: trucks assembled with skf level 2 truck hub units (thu) received from meritor. These hubs can fatigue crack. ... Details of this recall 🔎 |
Should a failure occur during inclement weather on the driver's side while the vehicle is in motion, the operator's vision would be partially obscured.
| Recalled Vehicles: 1999 Navistar 5000, 1999 Navistar 9100, 1999 Navistar 9200, 1999 Navistar 9300, 1999 Navistar 9400, 1999 Navistar 9900 |
| Component: VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES |
| Recall Summary: Vehicle description: heavy duty trucks equipped with dana/sprague windshield wiper assemblies. The knurled pivot shaft (which operates the windshield wiper arm) is welded to a lever, which connects to linkage from the wiper motor. The weld at the pivot shaft to lever can fail. ... Details of this recall 🔎 |
If the spindle fails, a loss of driver control could occur, increasing the risk of a vehicle crash.
| Recalled Vehicles: 1998 Navistar 2500, 1999 Navistar 2500, 1998 Navistar 2600, 1999 Navistar 2600, 1998 Navistar 4700, 1999 Navistar 4700, 1998 Navistar 4900, 1999 Navistar 4900, 1998 Navistar 5000, 1999 Navistar 5000, 1998 Navistar 8100, 1999 Navistar 8100, 1998 Navistar 9200, 1999 Navistar 9200, 1998 Navistar 9300, 1999 Navistar 9300, 1998 Navistar 9400, 1999 Navistar 9400 |
| Component: SUSPENSION:FRONT:WHEEL BEARING |
| Recall Summary: Vehicle description: class 8 heavy duty truck chassis equipped with 16,000 lb. , 18,000 lb. , or 20,000 lb. Heavy duty steering axles. The inner wheel bearing cone for the steering axle wheel hub assembly does not properly fit onto the navistar steering axle spindle assembly.... Details of this recall 🔎 |
If this condition occurs, the drive line can vibrate and separate from the vehicle, causing vehicular damage, or personal injury, or both.
| Recalled Vehicles: 1997 Navistar 9100, 1998 Navistar 9100, 1999 Navistar 9100, 1997 Navistar 9200, 1998 Navistar 9200, 1999 Navistar 9200, 1997 Navistar 9300, 1998 Navistar 9300, 1999 Navistar 9300, 1997 Navistar 9400, 1998 Navistar 9400, 1999 Navistar 9400 |
| Component: POWER TRAIN:DRIVELINE |
| Recall Summary: Vehicle description: heavy duty trucks equipped with spicer spl170 55mm center bering package. The end yoke retaining nut can loosen. ... Details of this recall 🔎 |
This condition can result in a short circuit between contacts on the relay increasing the risk of a vehicle fire.
| Recalled Vehicles: 1997 Navistar 9200, 1998 Navistar 9200, 1997 Navistar 9300, 1998 Navistar 9300, 1997 Navistar 9400, 1998 Navistar 9400, 1997 Navistar 9800, 1998 Navistar 9800 |
| Component: ELECTRICAL SYSTEM:WIRING |
| Recall Summary: Vehicle description: heavy duty trucks equipped with prosleeper bunks. A micro relay located behind the hvac control panel in the bunk can corrode from moisture. ... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Jul. 15, 1999 | Suspension:front:hub | 80 |
| May. 4, 1999 | Visibility:windshield Wiper/washer:linkages | 4,553 |
| Mar. 15, 1999 | Suspension:front:wheel Bearing | 4,024 |
| Nov. 9, 1998 | Power Train:driveline | 5,487 |
| May. 27, 1998 | Electrical System:wiring | 16,012 |
| Jul. 29, 1997 | Service Brakes, Hydraulic:antilock | 89 |
| Jul. 28, 1997 | Wheels:lugs/nuts/bolts | 443 |
| Model | # Recalls |
|---|---|
| 1999 Navistar 9300 | 3 |
| 1998 Navistar 9300 | 4 |
| 1997 Navistar 9300 | 5 |
| 1996 Navistar 9300 | 2 |