There was one technical service bulletin issued for the 2010 Blue Bird All American D3.
| Bulletin Date: | Mar. 5, 2012 |
| Component: | Electrical system. |
| Bulletin Summary: | Fault code 4293 or 4294. Becomes active with engine calibration updates. This fault code can inadvertently become active, if the vehicle is not equipped with the engine brake lamp feature. Only applicable to vehicles with 2010 cummins 2010 |
| Vehicles covered in this TSB: |
2010 Blue Bird A3fe,
2010 Blue Bird All American D3.
|
| Bulletin Date: | Mar. 5, 2012 |
| Component: | Software. |
| Bulletin Summary: | Fault code 4293 or 4294. Becomes active with engine calibration updates. This fault code can inadvertently become active, if the vehicle is not equipped with the engine brake lamp feature. Only applicable to vehicles with 2010 cummins 2010 |
| Vehicles covered in this TSB: |
2010 Blue Bird A3fe,
2010 Blue Bird All American D3.
|
| Bulletin Date: | Mar. 5, 2012 |
| Component: | Electrical system. |
| Bulletin Summary: | Fault code 4293 or 4294. Becomes active with engine calibration updates. This fault code can inadvertently become active, if the vehicle is not equipped with the engine brake lamp feature. Only applicable to vehicles with 2010 cummins 2010 |
| Vehicles covered in this TSB: |
2010 Blue Bird A3fe,
2010 Blue Bird All American D3.
|
| Bulletin Date: | Mar. 5, 2012 |
| Component: | Software. |
| Bulletin Summary: | Fault code 4293 or 4294. Becomes active with engine calibration updates. This fault code can inadvertently become active, if the vehicle is not equipped with the engine brake lamp feature. Only applicable to vehicles with 2010 cummins 2010 |
| Vehicles covered in this TSB: |
2010 Blue Bird A3fe,
2010 Blue Bird All American D3.
|