There have been 5 technical service bulletins issued for the 2010 Can-am Spyder Rt.
| Bulletin Date: | Jun. 26, 2015 |
| Component: | Cooling system radiator assembly. |
| Bulletin Summary: | Technical service tip (tst): customer may complain of excessive heat felt in the engine compartment in certain riding conditions. The solution is to install the air scoop kit. Note that this will not reduce heat felt on the rh foot by the r |
| Vehicles covered in this TSB: |
2010 Can-am Spyder Rt,
2011 Can-am Spyder Rt,
2012 Can-am Spyder Rt.
|
| Bulletin Date: | Jun. 26, 2015 |
| Component: | Engine (pws). |
| Bulletin Summary: | Technical service tip (tst): customer may complain of excessive heat felt in the engine compartment in certain riding conditions. The solution is to install the air scoop kit. Note that this will not reduce heat felt on the rh foot by the r |
| Vehicles covered in this TSB: |
2010 Can-am Spyder Rt,
2011 Can-am Spyder Rt,
2012 Can-am Spyder Rt.
|
| Bulletin Date: | Dec. 20, 2013 |
| Component: | Fuel system. |
| Bulletin Summary: | Posting discussing the two recalls posted on transport canada and NHTSA concerning the fuel vapor canister vent hose to be replace or re-route and fuel cap replacement because the fuel cap may not fit onto the fuel tank filter neck. |
| Vehicles covered in this TSB: |
2008 Can-am Spyder Gs,
2009 Can-am Spyder Gs,
2010 Can-am Spyder Rs,
2011 Can-am Spyder Rs,
2012 Can-am Spyder Rs,
2010 Can-am Spyder Rt,
2011 Can-am Spyder Rt,
2012 Can-am Spyder Rt.
|
| Bulletin Date: | Apr. 1, 2013 |
| Component: | Steering wheel and handle bar. |
| Bulletin Summary: | Revision #1 of warranty bulletin 2010-7 dated September 7, 2010. This safety recall addressed the problem that a situation may occur where you may need to exert a force greater than expected to initiate the turning of the steering handlebar |
| Vehicles covered in this TSB: |
2010 Can-am Spyder Rs,
2010 Can-am Spyder Rt.
|
| Bulletin Date: | Apr. 1, 2013 |
| Component: | Steering. |
| Bulletin Summary: | Revision #1 of warranty bulletin 2010-7 dated September 7, 2010. This safety recall addressed the problem that a situation may occur where you may need to exert a force greater than expected to initiate the turning of the steering handlebar |
| Vehicles covered in this TSB: |
2010 Can-am Spyder Rs,
2010 Can-am Spyder Rt.
|
| Bulletin Date: | Jan. 17, 2013 |
| Component: | Tank assembly filler pipe and cap. |
| Bulletin Summary: | Brp: on the can-am roadster, the fuel cap fails to seal properly, on fuel tank filler neck, causing fuel vapors and in presence of an ignition source, might result in a fire and needs replacing. Models 2008-2012 can-am spyder GS, rs, and |
| Vehicles covered in this TSB: |
2008 Can-am Spyder Gs,
2009 Can-am Spyder Gs,
2010 Can-am Spyder Gs,
2011 Can-am Spyder Gs,
2012 Can-am Spyder Gs,
2008 Can-am Spyder Rs,
2009 Can-am Spyder Rs,
2010 Can-am Spyder Rs,
2011 Can-am Spyder Rs,
2012 Can-am Spyder Rs,
2008 Can-am Spyder Rt,
2009 Can-am Spyder Rt,
2010 Can-am Spyder Rt,
2011 Can-am Spyder Rt,
2012 Can-am Spyder Rt.
|
| Bulletin Date: | Jan. 17, 2013 |
| Component: | Fuel system. |
| Bulletin Summary: | Technical service tip (tst) addressing the details of the recall fuel cap replacement, where the fuel cap may not seal properly onto the fuel tank filter neck. Fuel vapors in the presence of an ignition source could result in a fire. Brp is |
| Vehicles covered in this TSB: |
2008 Can-am Spyder Gs,
2009 Can-am Spyder Gs,
2010 Can-am Spyder Rs,
2011 Can-am Spyder Rs,
2012 Can-am Spyder Rs,
2010 Can-am Spyder Rt,
2011 Can-am Spyder Rt,
2012 Can-am Spyder Rt.
|