This design change of the idler gear case and idler gear bolt is to address the idler gear bolt loosening under abnormal loading from fuel supply pump and the gear train. The redesigned idler gear case and idler gear bolt are designed to
3
2007 Hino Conventional Models air bags TSB (Bulletin TT-15-024)
Bulletin Date:
Jul. 28, 2015
Component:
Air bags.
Bulletin Summary:
2005-07 conventional light duty truck (ldt) with a j05e engine. During engine performance diagnostics, comparative readings from a like engine can be useful data points from a known good engine to use for comparisons (refer data in pdf docu
When replacing an engine block with service part no. , 11401e0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 o
5
2007 Hino Conventional Models lane departure TSB (Bulletin SB-14-019)
Bulletin Date:
Sep. 16, 2014
Component:
Lane departure.
Bulletin Summary:
In the event that one of the subject vehicles is driven while the abs warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an abs warning lamp illuminated can lead to overheating
Vehicles covered in this TSB:
2007 Hino Conventional Models.
6
2007 Hino Conventional Models power train TSB (Bulletin SB-14-019)
Bulletin Date:
Sep. 16, 2014
Component:
Power train.
Bulletin Summary:
In the event that one of the subject vehicles is driven while the abs warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an abs warning lamp illuminated can lead to overheating
The following is to inform you of the revision of the inspection procedure for the dtc?s p0340 and p0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to use for serv
There are two (2) distinctly different bolts that secure each camshaft bearing cap to the cylinder head intermediate cover. The torque specifications are not the same for both bolts and the specifications in the hino workshop manual are amb
There are two (2) distinctly different bolts that secure each camshaft bearing cap to the cylinder head intermediate cover. The torque specifications are not the same for both bolts and the specifications in the hino workshop manual are amb
13
2007 Hino Conventional Models power train TSB (Bulletin 09-012)
Bulletin Date:
Jun. 9, 2009
Component:
Power train.
Bulletin Summary:
There are two (2) distinctly different bolts that secure each camshaft bearing cap to the cylinder head intermediate cover. The torque specifications are not the same for both bolts and the specifications in the hino workshop manual are amb
Target and actual fuel pressure do not mirror each other while performing diagnostics and no obvious issues with the fuel filter or fuel system have been found.
Target and actual fuel pressure do not mirror each other while performing diagnostics and no obvious issues with the fuel filter or fuel system have been found.
Target and actual fuel pressure do not mirror each other while performing diagnostics and no obvious issues with the fuel filter or fuel system have been found.