6
2013 Hino Conventional Trucks W/jo8 back over prevention TSB (Bulletin TT-16-014)
Bulletin Date:
Oct. 19, 2016
Component:
Back over prevention.
Bulletin Summary:
General - dtc p20b2 coolant cutoff valve diagnostic - most scr (selective catalyst reduction) coolant cutoff valves received through warranty return do not reveal any faults when tested. Please follow the checks outlined below before replac
General - dtc p20b2 coolant cutoff valve diagnostic - most scr (selective catalyst reduction) coolant cutoff valves received through warranty return do not reveal any faults when tested. Please follow the checks outlined below before replac
General - dtc p20b2 coolant cutoff valve diagnostic - most scr (selective catalyst reduction) coolant cutoff valves received through warranty return do not reveal any faults when tested. Please follow the checks outlined below before replac
General - dtc p20b2 coolant cutoff valve diagnostic - most scr (selective catalyst reduction) coolant cutoff valves received through warranty return do not reveal any faults when tested. Please follow the checks outlined below before replac
Engine - cam housing bolt torque update. The procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before inst
Engine - cam housing bolt torque update. The procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before inst
If a 2013 - 17 coe model 195h is encountered with a will not move in any gear condition and any combination of dtc's p0706, p0756, p0761, p1604, please perform the following for engineering review.
Def injec tor assembly replacement. The following service alert is to advise about the def (diesel exhaust fluid) injector if it's being replaced under warranty. The recent changes made to the def injector include enhancements to the alumi
General - 2011-17 conventional trucks or 2013-17 coe trucks. Current production def injectors contain enhancements including improvements to the aluminum housing. When replacing the def injector, it is necessary to install the complete def
General - conventional trucks (238, 258, 268, or 338) a subject vehicle may experience an external fuel leak from the burner atomization module assembly, specifically the fuel pressure regulator. This repair procedure outlines replacement o
General - conventional trucks (238, 258, 268, or 338) a subject vehicle may experience an external fuel leak from the burner atomization module assembly, specifically the fuel pressure regulator. This repair procedure outlines replacement o
Engine - coe trucks (155, 155h, 195, or 195h) an enhanced fuel cut valve is available to address a potential sticking coindition that results in excess residual pressure in the dosing injector (7th injector) supply pipe. A stickingf fuel cu
Engine - coe trucks (155, 155h, 195, or 195h) an enhanced fuel cut valve is available to address a potential sticking coindition that results in excess residual pressure in the dosing injector (7th injector) supply pipe. A stickingf fuel cu
20
2013 Hino Conventional Trucks W/jo8 back over prevention TSB (Bulletin SB-16-018)
Bulletin Date:
Jul. 15, 2016
Component:
Back over prevention.
Bulletin Summary:
General - cab over engine trucks 155, 155h, 195, or 195h enhanced software is available for the vcs module to correct false detection of dtc p161f-malfunction of act uator relay, when a low voltage condition is present.