Volkswagen Rabbit owners have reported 9 problems related to brake light on (under the service brakes category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Volkswagen Rabbit based on all problems reported for the Rabbit.
About 4 years ago, I was driving on the freeway, heading home from work. The cars ahead had hit their brakes, so I began to hit my brakes and immediately felt them lock up and my car began fishtailing. It then spun around 180 degrees, inches away from hitting a truck behind me head-on. After this point, I was always weary of hitting my brakes in an emergency situation because I never felt I had control of the car. It wasn't until I researched the abs issues with vw did I realize this could have been directly related to the faulty piece. In July of 2017, the abs and brake lights came on while we were leaving a parking lot, and stayed on. These lights were accompanied by the check engine, epc, air bag, gas and steering system lights, and the speedometer also stopped working. The car also began to handle strangely, and wouldn't rev higher than 4000 rpms. After researching what could be causing this, we came across many abs module failures that sounded exactly like what we had happening. We then came across the vw abs module recall from 5 months before, and after calling vw to verify we indeed were part of the recall, they told us to take the car to a dealer and they would take care of it. We made the appointment, and took the car in. The car was in their shop for 3 days before they let us know that we didn't fall under the recall requirements, and vw was in fact not going to fix anything with the abs module. Instead, they gave us a $1400 quote to fix the faulty module. We are now stuck paying nearly half of what the car is worth to make it safe to drive, even though there are many issues with their abs module, and they initially told us we qualified to get it fixed.
See
all problems of the 2009 Volkswagen Rabbit
🔎.
As per NHTSA 16v-913 my Volkswagen Rabbit has been presenting the symptoms stated in the safety recall. The abs light, electronic stability control, and brake light have come on numerous times and hard braking, and in not so hard braking in the snow. He problem has progressively worsened to the point that these lights no longer go out after and ignition cycle. I am essentially driving without abs or stability control, one of the main reasons I purchased this car. The code for u0121 lost communication with anti-lock brake system (abs) control module no longer clear with a hand held code reader or a laptop running ross-tech's vcds software. I took my broken Volkswagen to danbury vw in danbury CT to perform the safety recall (16v-913). Because of not being able to communicate with the abs control module to upload the new software, they have denied the recall and say I must foot the bill to replace the module so they can then upload the new software to see if they get the code for faulty solder joint. Volkswagen is trying to side step this issue. I believe my car would have been able to upload the software when this issue first started happening, but now the abs control module has completely failed, probably due to the bad solder compound. Now they are denying claims, I am not the only one. The nthsa needs to look deeper into this problem.
Vehicle was taken to a Volkswagen dealership to perform an abs software update as per the Volkswagen recall notice. Prior to service, vehicle did not display any warning lights or alarms sounds that would indicate service needed. Per the dealership, the abs software update was performed and as a result a failure code was detected that did not match the failure code identified per the recall test plan. Per the dealership, the abs repair and software update could not be completed because the failure code found is not identified per the recall test plan. Per the dealership, there is no understanding of the fault code received, whether it may have been the result of the software update, or perhaps an error performed by the technician, and that no further diagnostics would be performed. Per the dealership, the abs needs to repair at the expense of the vehicle owner and that the drivability of the vehicle may be a concern. Dealership instructed vehicle owner to contact Volkswagen customer service to determine if service could be performed and expense covered by the manufacturer warranty. Per Volkswagen customer service, there is no understanding as to why the fault code was detected after performing the abs software update and that additional service, including diagnostics, would not be performed other than at the expense of the vehicle owner. At vehicle ignition, the abs and brake warning lights are flashing and the alarm sound is heard. The abs and brake warning lights continue to flash while the vehicle is in operation and motion.
I received notice Feb. 2017, for recall due to "safety recall 45f2-abs control module software". Upon taking to dealership per letter instructions, informed that "software fix" would be attempted. If not sufficient hardware part would need to be ordered. Car returned with "brake light flashing and abs/skid lights on". Part was ordered but no eta date is available. This has been going on for a week now. Calls to vw corporate has been to no satisfaction. There simply is a "back order" on the part. This is unacceptable to put out a recall and not have the needed part! meantime driving car with flashing warning lights! while a courtesy car has been offered, why would I give them my vehicle for an unknown amount of time! is this going to go on for 3 weeks? 3 months? a year? no one can give me an answer. I feel the car should not have been tampered with if the needed part was not in stock! shame on vw for issuing a recall and not having the parts ready to ship. Didn't they learn anything from all these other recalls that have happened!?! how many cars are now on the road with no abs system in place????? vw needs to be held accountable for this poor execution of a recall and servicing its customers in a timely fashion. What can you do to help?.
Electrical problems have been constant since purchasing (I. E. The check engine light coming on for no apparent reason during long trips, the prnd lights lighting all at once at random). These issues were not much of a problem until recently. I started the car and immediately the abs, traction control, and brake lights lit up and the car made 3 "beeps". I turned the car off and on again, and the same thing happened and continued. I then drove on the freeway for about 10 miles when the steering, and epc lights came on. Simultaneously, the speedometer and gas gauges dropped to zero and the car would not accelerate. The steering became slow to respond/delayed. Luckily there were not many cars on the road and I safely pulled to the shoulder. I safely drove the car home that day, but my husband experienced the same issues when he tried to drive the car the day after. After researching these symptoms online, I found that this is a very common problem for 2009 gti and Rabbit models, and that, while this malfunction makes the car unsafe to drive, vw will not help consumers with the estimated $2k repair costs.
The abs control has failed (diagnosed by Volkswagen dealership), abs, traction control and brake lights are on, speedimoter is always on zero, the car looses steering control.
The abs brake warning light came on. . . . Followed by steering light, engine light speedometer failing, gas warning light on, now my car will not start and the key is stuck to the ignition. My power windows not working properly . . . . All started from the abs brake warning light.
Abs, traction control & handbrake lights turned on in the middle of driving. Nearly had accident because abs did not activate when needed. Me and my family were in significant danger. Upon mechanic inspection the abs module has failed.
I had observed twice that the abs and brake system lights illuminated under heavy braking. I read the service manual and several vw forums and my understanding was that this was normal under what is called �emergency break�. I both cases turning the ignition off and on again restored the car to normal. On February 2013 the abs/esc system failed and the car crashed against a wall while braking before a turn. Airbags did not deploy. We were two passengers on board: brian foxe and myself. Fortunately, none got hurt although I had to be picked up by paramedics. We both have taken that turn many times and we could not explain what went wrong went we used the brakes before the turn. We never understood what happened until I got the recall. Since then, the abs failure had caused at least the following: -suffering from the crash and incredible amounts of stress which required therapy -I had to buy another car ASAP and I bought another 2007 Rabbit -the 2009 Rabbit was finally put back together on July August 2013 -the 2009 Rabbit would lose abs/esc at the sightless break so it has been sitting as a backup car since then. -the car was serviced for a transmission issue on 2016 (Volkswagen customer care 160612855) and after it came back from the dealer the symptoms disappeared. That makes me believe that either: ovw knew about abs/esc issues (safety recall 45f2) and preventively updated the ecu. Othe ecu was updated as a routine or as part of the transmission service. As per today, I believe I have a Rabbit that has already had the ecu upgraded and cannot be diagnosed anymore. However, I have evidence and witnesses of what happened.
Problem Category | Number of Problems |
---|---|
Service Brakes problems | |
Brake Light On problems | |
Abs Brake Fail problems | |
Brake Abs Warning Light problems | |
Brake Disc Pads problems | |
Brakes Failed problems | |
Brake Antilock Wheel Speed Sensor problems | |
Brake Grinding Noise problems | |
Brake Disc Rotor problems | |
Brake Master Cylinder problems |