Table 1 shows one common electronic stability control related problems of the 2024 BMW X5.
| Problem Category | Number of Problems |
|---|---|
| Electronic Stability Control problems |
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic); however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced the failure. The VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control, service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
See attached document for complaint.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control - esc, service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that his wife was in a parking lot driving at approximately 3 mph when she depressed the brake pedal and the vehicle was not slowing. The contact stated that his wife had to use more force than normal to depress the pedal. The contact stated that she had not observed any warning lights. The contact stated that his wife crashed into the parking lot stop block and that the front end of the vehicle crashed into a steel fence. The contact stated that the front bumper had scratches and some dents. There was no damage to the headlights or the grill. The contact stated that his wife was not injured. The contact had driven the vehicle to a dealer to have the vehicle diagnosed. The vehicle was not diagnosed and had not been repaired. The failure mileage was approximately 4,500. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000(electronic stability control(esc), service brakes, hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000(electronic stability control, service brakes, hydraulic); however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced the failure. The VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 ( electronic stability control (esc), service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000(electronic stability control (esc), service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number 24v104000 (electronic stability control (esc), service brakes) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated while driving at an undisclosed speed, the power brake assist failed to operate as needed, causing the contact to lose control of the vehicle. There were no warning lights illuminated. The dealer was contacted; however, the vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the nhsta hotline for assistance. The failure mileage was approximately 9,480. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control - esc, service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while driving at approximately 65 mph, as she attempted to depress the brake pedal to slow for traffic, the brake pedal was very hard to depress and she had to use more than normal force to depress the brake pedal. The contact stated that the "ibs system brakes not functioning" warning illuminated on the instrument cluster. The contact pulled off of the highway and turned the vehicle off and on. The contact stated that the brakes had started functioning normally. The contact stated that the failure had reoccurred, however when she turned the vehicle off and on the brakes were no longer returning to normal functionality. The contact had taken the vehicle to a dealer who advised that the failure could not be duplicated. The contact stated after the subsequent failures of the brake system she had taken the vehicle back to the same dealer who advised that the remedy was not available. The failure mileage was approximately 9,000. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact stated that while driving at undisclosed speeds, the vehicle stalled while driving through ankle-height water. The kill switch was stuck. After the failure, the engine overheating warning light illuminated. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle was towed to the local dealer but was not diagnosed or repaired. The undercarriage of the vehicle had sustained unknown damages during transportation. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The approximate failure mileage was 4,023. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact stated while driving approximately 15 mph, the contact attempted to depress on the brake pedal however there was a reduction in the power assist braking leading to the vehicle crashing into another. No warning lights was illuminated. The front passenger side of the vehicle crashed into the rear end of the other. The crash occurred on a unstated off ramp from a highway to a main street. The air bags were not deployed. The vehicle was drivable. A police report was filed. The vehicle was not destroyed. The vehicle was driven to a certified collision repair center and the contact received a diagnosis stating that the front bumper along with several other things needed to be repaired. The vehicle was repaired. The contact was notified that the VIN was included in the NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes) however, the parts was not available; the VIN was not included prior to the crash. The manufacturer was made aware of the failure and confirmed that the remedy was not available. The failure mileage was 3,909.
The contact owns a 2024 BMW X5. The contact stated that while driving at an undisclosed speed, the vehicle made abnormal sounds while accelerating. Additionally, while the transmission was in reverse (r), the brake pedal was depressed, but the vehicle failed to stop immediately. An unknown warning light was illuminated. The contact became aware of NHTSA campaign number: 24v104000 (electronic stability control, service brakes) associated with the VIN from cars. Com. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA hotline. The failure mileage was unknown.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 ( electronic stability control (esc), service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic). However, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes, hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control - esc, service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2024 BMW X5. The contact received notification of NHTSA campaign number: 24v104000 (electronic stability control (esc), service brakes) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated while driving approximately 35 mph, a warning flashed on the instrument panel to stop the vehicle and to use the parking brake. The contact pulled over and became aware that the vehicle had independently shifted to neutral(n). The contact depressed the brake pedal and observed that "use emergency brake" message was displayed on the instrument cluster. The contact stopped and turned off and restarted the vehicle to attempt to reset the computer; however, a symbol of a vehicle was flashing red on the instrument cluster while attempting to restart the vehicle. The vehicle failed to restart. The contact had the vehicle towed to a dealer. The vehicle was not diagnosed and was not repaired. The failure mileage was approximately 11,000. VIN tool confirms parts not available.