Blind Spot Detection problems of the 2024 Chevrolet Colorado

See attached document for complaint.

The components failing are the (adas) components. Specific concerns are with adaptive cruise control, automatic emergency braking, front facing detection camera, and blindside detection. The front facing camera will randomly deactivate prompting a message to check for obstructions as a possibly reason of failure. Upon checking, and also wiping the lense, there is not obstrution. Blindside detection operates at random and at times will stay on for a sustained period without any vehicles near or around my vehicle. This is especially bad at night because the light is extremely bright and directed into the drivers vision. Adaptive cruise control will falsely detect vehicles or objects that are not present and implement emergency braking before recognizing there is no vehicle/object and then speed up. Sometimes this will happen consecutively in repetition. This is especially concerning because it has happened at interstate speeds as well as highway speeds with traffic behind me during the day time. It would brake aggressively taking my speed from 65 mph down to 40 mph and the change to a wide open throttle to regain speed only to brake again. Sometimes it will just keep slowing until I turn off cruise control. All of this happens without notice or indication other than the blindside warning lamps during its failure. It has happened often enough that I can not use the cruise control confidently. I have had it into the dealership for inspection and they claim there were no codes and could not reproduce the symptoms during a brief test drive. They however inform me that the front facing camera mentioned earlier does all the sensing for these components but did not get a reaction from it. I do experience one or more of these problems daily. I have also experienced false pedestrian warnings from the system early on but that has not happened for 3 months currently. I welcome requested inspection to hopefully get this fixed for my safety and those around me.

1. ) while driving signalling for a right hand turn and then subsequently completing the right hand turn, the vehicle then signals left on its own accord. This is distracting for the driver and confusing to other motorists on the road. 2. ) blind spot monitoring system frequently turns on and or blinks rapidly (effects both driver and passenger side mirrors sporadically) when no other vehicles in the same vicinity. Distracting to driver who then is prompted to look around for vehicles that are not there. Quite often the trucks blind spot monitors light up when not a single other vehicle is on the road anywhere. This takes place on full size two lane roads and wide open multi lane highways where there are no objects near the vehicle whatsoever.

1) all the sensors on the truck relating to the auto emergency breaking, pass sensors, cruise control etc are malfunctioning, truck was at 10,000 miles at the time and brand new. 2) this feature contributed to an accident on Jan 14 2025. I could not see because of the sun and rear ended the car in front of me. 3)the dtc report on the truck came back and stated 6 errors relating to the systems and sensors to include a data memory loss. 4)took in for servicing at the dealership and they refused to touch the issue. Gm is inspecting the truck Feb 13. 5) there were warning indicators however I though it had to do with ice blockage from a snow storm. That morning I cleaned all the cameras off and did not immediately notice it and assumed it went away. It seems the the warning does not immediately come on takes approximately 1-2 minutes. There is no differentiating a software-servicing issue with a camera blockage.