Steering Rack And Pinion problems of the 1997 Chrysler Concorde

Four problems related to steering rack and pinion have been reported for the 1997 Chrysler Concorde. The most recently reported issues are listed below.

1 Steering Rack And Pinion problem

Failure Date: 01/08/2002

Steering was losing control or not responding properly because of the nuts / bolts, and a faulty bushing needed to be replaced on rack and pinion. Dealer and manufacturer notified. Feel free to provide any further information.

2 Steering Rack And Pinion problem

Failure Date: 08/21/1997

Vehicle experiencing problem with rack and pinion being replaced by dealer on three occasions. Replacement was done under warranty, but causes of failure are still unknown. The tires were prematurely worn on outside edges.

3 Steering Rack And Pinion problem

While making a left turn, vehicle suddenly lost power steering and the tires locked up. This was causeb by rack and pinon failure.

4 Steering Rack And Pinion problem

Rack and pinion replaced 2 times in three years, making knocking noise again. . . . . . Ac evaporater replaced 3 times in 3 years (dealer said if it was fixed within 12 months it would still be under warrantee, not mentioning the 7 yr warrantee extension) instrument panel would turn off intermittanly now it seems to be not working at all,,,, check engine light has been on for 2 years. . . Dealer resets it and it works for about 2 weeks(serviced 5 times) . . . Regulator in pass. Door does not lift power window.




Fuel Economy of Concorde Vehicles
Concorde Service Bulletins
Concorde Safety Recalls
Concorde Defect Investigations