Steering Related Problems of the 1997 Chrysler Concorde

Table 1 shows nine common steering related problems of the 1997 Chrysler Concorde. The number one most common problem is related to the steering tie rod assembly (five problems). The second most common problem is related to the steering rack and pinion (four problems).

Table 1. Steering related problems of Chrysler Concorde

Problem Category	Number of Problems
Steering Tie Rod Assembly problems	5
Steering Rack And Pinion problems	4
Steering problems	2
Steering Linkages problems	1
Power Steering Hose, Piping, And Connections problems	1
Steering Failed problems	1
Steering Rack problems	1
Power Steering Pump problems	1
Hydraulic Power Assist Steering System problems	1

Recently reported Steering problems of the 1997 Chrysler Concorde

The Steering Tie Rod Assembly problem

I have a 1997 Chrysler concord. I had a severe clunking noise in front end. After several trips to the garage and almost $1000 later I had replaced both inner tie rod ends, all 4 cradle bushings as well as both swaybars in front end. Not to mention front end alignments after each repair. Read details...

The Steering Rack And Pinion problem

Steering was losing control or not responding properly because of the nuts / bolts, and a faulty bushing needed to be replaced on rack and pinion. Dealer and manufacturer notified. Feel free to provide any further information. Read details...

The Steering problem

I have experienced alot of play in the steering of my Chrysler Concorde 1997. After inspection it was found that the front cradle bushings where worn away. I have owned this car for 2 years. I looked at a web site concerning this and other problems with this and other chrsler models. Read details...

Steering related problems in other Chrysler Concorde model year vehicles:

Switch Make:

Switch Model:

✿ Fuel Economy of Concorde Vehicles

☘ Concorde Service Bulletins

⚑ Concorde Safety Recalls

☤ Concorde Defect Investigations