Dash Wiring problems of the 1997 Ford Contour

Seven problems related to dash wiring have been reported for the 1997 Ford Contour. The most recently reported issues are listed below.

1 Dash Wiring problem

Failure Date: 01/12/2001

Wires are fused together and shorted out. No fuse or circuit breaker openned. Fire went out when the key was turned off.

2 Dash Wiring problem

Failure Date: 10/20/2000

Ac fan / blower speed switch failed at the 3rd speed setting, requiring the entire control assembly to be replaced.

3 Dash Wiring problem

Failure Date: 08/07/2000

This problem seems to be the same as NHTSA action number pe00023. The fan switch and harness connector show burn damage, a related problem seems to be that the fuse protecting the circuit did not fail. The fuse should have burned out when the connector failed.

4 Dash Wiring problem

Failure Date: 06/26/2000

This item was covered once under my original warranty and once under my extended warranty. No safety defect listed.

5 Dash Wiring problem

Failure Date: 06/01/1999

The electrical problems I have experienced include; failure of temperature gauge, failure of clock light, failure of electric windows and emergency brake light igniting when emergency brake disengaged.

6 Dash Wiring problem

Vehicle stalls out without warning, replace sensor, iac valve, mass air flow sensor, transmission, shift assemble.

7 Dash Wiring problem

Dash panel lights went out. Cause unknown. Consumer received a recall letter shortly after this problem occurred, indicating that there was a short in the under dash wire harness. When the vehicle was taken into the dealership, he wanted the consumer to pay for repairs.




✿ Fuel Economy of Contour Vehicles
☘ Contour Service Bulletins
⚑ Contour Safety Recalls
☤ Contour Defect Investigations