Table 1 shows one common other fuel system related problems of the 2023 Ford Edge.
| Problem Category | Number of Problems |
|---|---|
| Other Fuel System problems |
On June 20th 2026 while driving my 2023 Ford Edge sel awd at approximately 35mph on an active hwy (93 az nb in wickenburg az) the vehicle experienced a sudden catastrophic loss of motive power and came to a sudden stop in a jerking motion. The vehicle completely disabled itself without warning in live traffic, presenting an immediate and severe safety hazard to myself and surrounding motorists. I was forced to stay in an immobile position impeding the flow of traffic and could not coast safely out of the way of hazardous traffic conditions and subsequently was almost hit by a semi-truck and another pov. The vehicle was subsequently towed out of the hwy with law enforcement present for safety and the local repair shop provided a quick analysis of transmission failure. About 2 weeks later, the vehicle was towed by aaa to another mechanic and subsequently an authorized Ford dealership where through diagnostic evaluation and repair. The official scan log revealed a critical internal failure of the powertrain control module (pcm) identified by diagnostic trouble code p0600 (serial communication link failure). This total electronic communication breakdown immediately triggered an un-commanded cascade of secondary transmission performance faults, specifically p0751 (shift solenoid a stuck off) and p2700, p2701, p2704, p27b2, p27b4 (transmission friction element application time/performance faults). The failure terminated in codes p073d (unable to engage neutral), p07e4 (unable to engage gear 7), and p07e6 (unable to engage gear 8) which locked the powertrain. Crucially, this sudden module collapse and cascading powertrain destruction occurred exactly 81 days following a mandated factory recall regarding the pcm was performed by an authorized Ford dealership on my vehicle. The engineering evidence suggests that a corrupted software flash or module disruption during the recall process caused the master pcm to issue erratic hydraulic line pressure commands, starving the trans.
Car hesitates when giving gas pedal, on going isssue, doesn't happen all the time speratic.