Windshield Wiper/washer problems of the 1998 Ford Windstar

Replacement windshield wiper (pass) does not seem to fit correctly-none of the wipers in dealer stock fits with same positive locking action as the orginal wiper blade. Appears that wipe blade assy can pop off under some conditions.

Driver side wiper failed during a major downpour in rush hour traffic. Visibility was next to zero. Managed to get vehicle to the side of the road without incident. In checking wiper arm I found the nut attaching the wiper arm to the wiper motor assembly had come lose. Because of the loose condition, wiper arm would not move more than 1-2 inches. A simple washer or lock washer under the nut would have prevented this failure.

You can call me to get details or Ford can call. Both wiper and seat were safety items and caused us to drive this new van in a very unsafe mannor . The wiper motor had to be replaced first then some module. Took about one week to get the wipers fixed. The driver seat tilts and slides forward so people can get in and out the back. The retaining nut fell off the stud that holds the cable on. Since two push nuts were under the seat and both would not stay on the stud I think the studs are undersized. Once the cable pops off the seat tilts forward and the slide is free to move forward or back but no way to lock the slide or tip the seat back. I had to drive like this to get home. Face about 2 - 3 inches from the steering wheel. Call for more details if you want.