Front Suspension Hub Problems of Mitsubishi Montero

Last year in November of 2005, I had to replace the passenger side wheel hub bearing because the bearings inside the hub broke down. Prior to getting it replaced, loud metallic grinding noise was coming from the wheel area. I took the hub bearing apart and found that the bearings were damamged and no sign of grease inside of the hub bearing. Now, on may 5, 2005, I have the same kind of problem and I inspected the hub bearing by taking it apart and discovered the bearings were damage. This led to my conclusion that it must have been a product defect and not a coincidence. I drive my vehicle from home to work normally and never have abuse the use of the vehicle like taking it offroad for a joy ride. It is a 2001 full size limited Mitsubishi Montero. Please, someone help me out because it caused me a great deal in time and money to replace the parts.

See all problems of the 2001 Mitsubishi Montero 🔎.

Within a few weeks of purchasing our vehicle, we brought it back to the dealer due to violent shaking from the front end. We were told we needed 4 brand new tires. Buying new tires did not fix the problem. Within a few days we began to hear a humming, vibrating, and growling noise coming from the front of the vehicle when you hit approximately 40 mph. We brought the vehicle back to the dealer and brought the sales manager for a test drive to hear the noise. When my wife explained that she was scared to drive the vehicle, they assured her that it was not a safety hazard and the vehicle would be fine to drive. The service manager called and said they had to replace the free wheel valve solenoid. We picked up the truck and on our way home the noise returned. We called the service manager and explained that the noise was still there and we were to bring the vehicle in again and take the technician for a test drive in it so he can hear the noise. While on test drive the tech advised her that they had other Montero's that made the same noise and when they changed the sensor it went away. Then they said the "torque" converter was bad - they changed it but it didn't fix the problem, then they drained the transmission fluid, didn't fix the problem. Then we were told they might have to replace the entire drive shaft. They never changed the drive shaft but instead replaced the left hub bearing assembly. My wife picked up the vehicle 2 days later and the noise was gone but the engine was "jumping" every time she stopped at a red light. This has happened several times, but we keep getting told that the computer isn't showing any problems. Why has nothing been done about all the roll over cases we keep hearing about?.

While driving at any speed and turning the steering wheel to the left or right the vehicle always swayed to the right. The dealer replaced many parts but the problem is still occurring. The vehicle also made noise while driving over bumps and while making turns. While driving the front passenger axle and wheel hub broke. The 4x4 hi light was flashing. The dealer replaced the shifter switch.

See all problems of the 2003 Mitsubishi Montero 🔎.

I have 2 complaints. First: I have had the car checked several times by the dealer to locate a very loud noise coming from the front of the car. It has to be in something that has to do with the steering or I guess suspension. I have had the right front hub assembly replaced, new tires and a brake job that I wasn't supposed to have done on the truck and I still have the noise that has been confirmed by the dealership technician. When driving straight, the car has loud hum. When I steer to the right and the weight of the truck shifts to the left, the noise goes away. When I steer to the left and the weight of the truck shifts to the right, the noise gets louder. I haven't noticed anything yet with the steering that might seem dangerous, but I feel very uneasy about the car. I feel like one day I am going to be driving and something will just snap. The main thing is I don't have the money to keep taking the truck to dealerships to investigate what is going on and finding nothing. Second, I was wondering if there is a standard for the placement of the brake and gas pedals with respect to the placement of the seat. When I purchased the truck I realized that the seating was kind of wierd but I didn't think anything of it. Now, after having been seen by several dealers. Because of extreme pain in my back, but primarily my hips to the point of considering surgery. They ask if I have been in an accident or fallen or had any trauma and I haven't. Then I realized the pain did not begin until I got this truck and I primarily feel poorly when I am driving and right after I drive. So I really started paying attention to the position my body is in when I am driving and my legs are in a very awkward position in order to reach the pedals. Thus my question: do these types of standards for pedal placement exist and where might I take my truck to have it measured or tested for compliance.

Right side of car suddenly dropped when making a left turn from a stop light. Driver lost control of car running into right side curb no injuries. After collision the wheel was at an angle and joint at the right upper control arm was loose at the hub. Also, the right rear wheel rim was broken and the rear tire had become flat. There was no damage to tire to indicate any kind of blow out. Parts that required replacement included right rear hub, right rear axle assembly, right rear shock, right rear wheel and tire, right rear upper control arm and right lower trailing arm. Observation of the damaged hub indicated that the slot that holds the bolt from the upper control arm was distorted into an oval shape. Dt.