One problem related to electrical jack has been reported for the 2013 Nissan Rogue. The most recently reported issues are listed below. Please also check out the statistics and reliability analysis of the 2013 Nissan Rogue based on all problems reported for the 2013 Rogue.
I went to use the jack provided by Nissan to change a flat tire. This was the first time the jack had ever been used. As I started to elevate the vehicle higher I noticed the jack started to bend and collapse, as the screw mechanism also started to bend. The attached photos probably do not truly show how much both the frame & screw of the jack had actually bent. I had to use another jack to get the faulty one out from under the vehicle. Afterwards with the assistance of a vice, I was able to close the defective jack and in doing so it somewhat straightened the screw and frame. The screw was severely concave, and the jack frame listed a lot with the vehicle weight. I was fortunate to be doing this on a concrete driveway at home. The emergency brake was fully engaged, the transmission was in park with the engine off, and I had wooden blocks behind the rear tires. My concern was that had this happened on the side of a road, and I didn't have a second jack; or had not noticed the bending, myself or anyone else in a similar situation could have been seriously injured. In doing an internet search afterwards, I found a number of owners who had the same problem with this particular scissor jack from the same make, model & year.