There have been 8 safety recalls for the Itasca Itasca. The most recent recalls are shown below. Table 1 and Table 2 show the historical recalls and the recall statistics by the model year of the Itasca Itasca.
In the event of an accident, the vehicle driver or occupant would not be properly restrained increasing the risk of personal injury.
| Recalled Vehicles: 1997 Itasca Itasca, 1997 Winnebago Winnebago |
| Component: SEAT BELTS:FRONT:RETRACTOR |
| Recall Summary: The seat belt retractor located next to the driver and passenger seats will not allow the belt to be extended so that it can be used. ... Details of this recall 🔎 |
Wiper failure could result in obscured vision throughthe windshield with potential for an accident.
| Recalled Vehicles: 1990 Itasca Itasca, 1990 Winnebago Winnebago |
| Component: VISIBILITY:WINDSHIELD WIPER/WASHER |
| Recall Summary: Windshield wipers may oscillate beyond the perimeter of the windshield frame causing wiper failure. ... Details of this recall 🔎 |
Fasteners may separate and allow rear sway bar to fallto the road surface, causing a road hazard which may result in an accident.
| Recalled Vehicles: 1987 Itasca Itasca, 1988 Itasca Itasca, 1989 Itasca Itasca, 1987 Winnebago Winnebago, 1988 Winnebago Winnebago, 1989 Winnebago Winnebago |
| Component: SUSPENSION:REAR |
| Recall Summary: The bolts, washers, and nuts used to install the optional rear sway bar are incorrect. ... Details of this recall 🔎 |
Abrasion may cause hose to lose brake fluid and the rearwheel brakes to become inoperable, increasing stopping distance which may resultin an accident.
| Recalled Vehicles: 1987 Itasca Itasca, 1988 Itasca Itasca, 1989 Itasca Itasca, 1987 Winnebago Winnebago, 1988 Winnebago Winnebago, 1989 Winnebago Winnebago |
| Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
| Recall Summary: The optional ride system component can abrade the flexible brake hose that is routed from the differential housing to the crossmember to the rear of the rear axle. ... Details of this recall 🔎 |
| Recalled Vehicles: 1986 Itasca Itasca, 1986 Winnebago Winnebago |
| Component: FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS |
| Recall Summary: The brass fitting on one end of the low pressure lp gas hose could be inadequately crimped to the hose allowing gas to leak. Consequence of defect: a leak could develop in the lp gas system with potential for explosion and/or fire.... Details of this recall 🔎 |
| Date | Component | Vehicle Affected |
|---|---|---|
| Nov. 5, 1996 | Seat Belts:front:retractor | 491 |
| Jan. 1, 1991 | Visibility:windshield Wiper/washer | 271 |
| Feb. 3, 1989 | Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings | 1,300 |
| Feb. 2, 1989 | Suspension:rear | 1,300 |
| Apr. 24, 1986 | Fuel System, Other:delivery:hoses, Lines/piping, And Fittings | 235 |
| Oct. 29, 1985 | Engine And Engine Cooling:exhaust System:emission Control | 285 |
| Mar. 3, 1981 | Vehicle Speed Control | 5,167 |
| Nov. 17, 1978 | Fuel System, Gasoline:storage:tank Assembly | 2,540 |
| Model | # Recalls |
|---|---|
| 1997 Itasca Itasca | 1 |
| 1990 Itasca Itasca | 1 |
| 1989 Itasca Itasca | 2 |
| 1988 Itasca Itasca | 2 |
| 1987 Itasca Itasca | 2 |
| 1986 Itasca Itasca | 1 |
| 1985 Itasca Itasca | 1 |
| 1984 Itasca Itasca | 1 |
| 1981 Itasca Itasca | 1 |
| 1980 Itasca Itasca | 1 |
| 1979 Itasca Itasca | 1 |
| 1977 Itasca Itasca | 1 |
| 1976 Itasca Itasca | 1 |
| 1975 Itasca Itasca | 1 |