Table 1 shows one common seat belt related problems of the 2019 Subaru Outback.
| Problem Category | Number of Problems |
|---|---|
| Seat Belt problems |
The driver lost control of the vehicle, possibly due to a failure involving the rear driver's-side tire. The vehicle initially made contact with the guardrail, causing moderate damage to the driver's side. Following this impact, the vehicle began to fishtail, and the automatic braking system activated. The driver recalls being thrown about within the seat during the incident, as the seat belt's emergency locking retractor appeared to fail. The seat belt did not lock during the collision sequence, which is supported by the absence of visible bruising across the chest area. Prior to the vehicle's final impact with the embankment, the seat belt unexpectedly released and struck the driver on the right cheek, resulting in visible bruising. Upon the final impact, after the seat belt had released, the driver was lifted from the seat and struck her head against the door frame. The vehicle's airbags did not deploy at any point during the crash. There were no warning messages, alerts, or noticeable symptoms indicating a mechanical issue prior to the incident. The vehicle has since been towed to a local body shop for a damage assessment and further inspection.
Right rear safety belt would not retract while installing a car seat with it. Seatbelt was pulled all the way out and it would not retract. Vehicle was taken to Subaru dealership. Dealer stated seatbelt had been over extended. I manually pushed belt in and pulled it out several times, and it finally retracted and started working. If belt doesn't retract it cannot be used. There was no reason for the belt to fail. Belt on left side of vehicle was used and retracted without a problem.