Speed Control Springs Problems of Dodge Caliber

Turn signals start to fail, even with the faulty bulb replaced newly replaced bulb does not work. Brought the car to the dealership and diagnosed the tipm (totally integrated power module) is faulty. Checked the internet and forums for similar issues other owners have worse issues such as headlights randomly going out, stalling at highway speeds, windshield wipers failing. . . That they are encountering due to a faulty tipm which can be a safety issue. The clockspring failure causes the airbag warning light to come on which signifies that the airbag will not work when it needs to. The cruise control system intermittently works which is also affected by the clock spring. Both lower control arms bushings (left and right) have been replaced twice due to wear. Seems excessive wear between 58k and 80k miles with mostly highway driving on smooth roads.

See all problems of the 2007 Dodge Caliber 🔎.

Driving to massachusetts from nh. . . 3 hour ride. . . Just outside of springfield, MA on a very busy highway, the car suddenly deaccelerated, lost power, and dash warning lights came on. The car went from approx 75/80 mph down to 30mph and lower. I was in the middle of the third lane, and had to try to get over to the break down lane with a car full of kids. This is not safe, and several vehicles were swerving around me to avoid hitting me in the rear end. When trying to accelerate, I would put my foot to the floor on the gas pedal and nothing would happen. It was like it suddenly went into neutral. Very, very dangerous. Also, the shifting lever often shifts my car into manual operation instead of automatic without me even realizing it.

See all problems of the 2011 Dodge Caliber 🔎.

Air bag light came up on, horn and cruise control stopped working. Many people with same issues on forums. It is the clock spring.

See all problems of the 2008 Dodge Caliber 🔎.