general problems of the 2016 Jeep Patriot - part 1

Vehicle acts like it wants to shut off. No warnings or check engine lights it just starts to shake and not let me accelerate. Auto shop looked at it and engine and transmission are ok. They look ed at it 6 times in 4 months and it just keeps happening. Now car is leaking oil and they can’t figure out where from, they replaced oil pan me anything relating to it so not sure what’s wrong. Also, clicking sound from air vent seems to be a electrical issue. Key is starting to bend from ignition shape also. We replaced the key multiple times. New brakes and new rotors but car screeches and sounds like brakes are old but they’re brand new. Car sounds like struggling when accelerators.

Vehicle began not accelerating and then shut-off. Check engine light was not on, but it sputters. I put it in the shop and was told it's the engine and needs replacing.

While driving my 2016 Jeep Patriot on multiple occasions, the engine suddenly shuts off without warning. After shutting off the car would also have alot of issues restarting. I finally took it to multiple mechanics and they all indicated they couldn't find out exactly what was the problem, given nothing showed up on their diagnostics testing's. After the car finally wouldn't start anymore, I got it towed to the dealership and they diagnosed the car with failed crankshaft sensor (which has already been recalled on a chunk of the 2016 Jeep Patriots manufactured).

On 3 separate occasions while driving the car will chime and abs, traction control & a third light (I think its the low tire) quickly blinks on and goes off again. The car will still be on and in motion. Today, the car shut off while idle. No lights were on prior and I had been driving for just under 10 minutes. After a period of 2-3 minutes, I tried to crank the engine again and it came on, no lights on dash. I drove to my destination.

The contact owns a 2016 Jeep Patriot. The contact stated that while driving at various speeds the vehicle momentarily shut off, causing the vehicle to decelerate unintendedly. Additionally, while driving at an undisclosed speed, the transmission warning light remained illuminated. The vehicle was taken to the local mechanic who was unable to determine the cause of the failure. The manufacturer and local dealer were notified, but no assistance was offered. The failure mileage was 150,000.

Thank you for taking the time to review my inquiry. My 2016 Jeep Patriot has experienced issues with the engine shutting off intermittently while driving at significant speeds and losing control of my vehicle, especially while on the highway. This has created some dangerous situations, which thankfully never caused any harm. After doing some research, I noticed that Jeep had a safety recall for this exact issue "s89 / NHTSA 16v-907, crankshaft camshaft sensor wire harness. " my 2016 Jeep Patriot has experienced failures with the crankshaft position sensor listed in that recall twice now (in September 2022 & December 2024). My VIN # [xxx] ) is not included in that recall, so I was denied reimbursement by the manufacturer both times even though the dealer was able to reproduce the issues both times (see attached receipts). After experiencing this twice, this has been severely disturbing for my family and has caused much anxiety when operating my vehicle. I have attached the associated receipts for the two repairs and summarized them below (both paid with credit card): - September 2022 - maryland auto & truck repair: $1,082. 07 - December 2024 - tate Dodge Chrysler Jeep, inc. : $684. 04 total reimbursement request: $1,766. 11 my belief is that my vehicle should have been included in that recall since it is the same year/make/model listed in the recall. I sincerely hope that NHTSA can honor this request. Thank you, [xxx] information redacted pursuant to the freedom of information act (foia), 5 u. S. C. 552(b)(6).

I have had constant electrical issues with my vehicle ever since I bought it in 2018 and I've had to replace the tipm twice already and it's messing up again! this repair isn't cheap and I feel that Jeep mopar should issue a recall regarding the crappy tipms they put in this particular vehicle. First of all all the warning lights on the dashboard come off and on intermittentally for no reason and now the doors won't lock using the key fob and my horn doesn't work. And now my ac isn't even working and I don't know if it has something to do with the tipm or not? but I'm constantly getting an error on the dash that says no bus communication. I know I can't be the only owner of a 2016 Jeep Patriot latitude 2. 0 that is experiencing these issues. If anyone else had experienced these issues please send a message to the NHTSA so we can get this issue investigated and elevate it into a recall!.

The car will stall while driving, making it tough to keep on the road and very dangerous for a crash. After taking to a Jeep dealership, it was determined the issue is associated with safety recall s89 / NHTSA 16v-907 regarding the crankshaft and camshaft sensors. Unfortunately, my car's VIN was not listed under the recall. I believe this was a mistake as it matches the exact description of car under the recall (this recall applies only to the above vehicles equipped with a 2. 0l (sales code ecn or ect) or 2. 4l (sales code ed3 or ed7) engine built from may 08, 2016 through July 12, 2016 (mdh 050800 through 071216).

The horn stopped working 4 months after purchase I've had it for a year. It has a hard time accelerating when you're hopping on the freeway. There's also a wiring issue with the rear blinkers and taillight it works for a little bit then goes out off and on throughout the trip.

Camshaft and crankshaft position sensors keep failing. I have gotten these replaced at a local auto shop 4 times in the 3 years I've had the vehicle. Each time they're replaced the pcm is flashed but issue comes back a couple days to a week later either when coming to a stop at an intersection or when driving up to 50 miles per hour, the acceleration doesn't work properly and rpms shoot down to zero and back up. Car has also shut off when coming to a stop under 5 mph and sometimes starts up again. Engine light and tcs light both come on when either sensor fails, car runs rough or doesn't start resulting in a tow to a shop. This is a huge safety risk and can cause a crash at any time. VIN does not have recall, but has all the issues described in the recall.

The check engine light came on. Checked it at an autozone. The error code was p0335, crankshaft position sensor. On the way to my mechanic, my vehicle stalled three time in 2 miles and had to pull over to a side. I felt lucky there were no vehicles behind me. Took it to a repair shop and the mechanic scanned it again. He told me to take it to a dealer because after entering my VIN, he was notified by his computer system that there is a recall notice out for this VIN. (s89) called a Chrysler dealer but was told that there is no recall by the VIN. Called Chrysler corp and explained the situation. The rep said since the basic warranty expired, the repair service will not be covered under the recall. The engine was keep stalling and I had to repair the vehicle at the mechanics shop. Replaced the crankshaft position sensor and the harness assembly. After the repair, the problem no longer exists. Cost of repair totals $410.

Had recall “fixed” just to have the supposedly fixed crankshaft sensor go bad and randomly stall when driving. They then say it was repaired even though it is having the same reason from the first recall. The fix is having intermittent electrical failure which causes it to stall with no warning no matter what speed you are going. It happened when I was going 20 and turning and again when I was on the highway driving 70. This is going to cause an accident. They said since the recall was already repaired I’m responsible for it.

There is some sort of electrical issue. Things keep going in and out: internal lights, cruise control, turn signals in front and back go out 6-9 times a year, abs light stays on even after it was serviced, the radio goes in and out. I lose power while driving snd allow the car to sit for a day or two and it cuts back on like nothing ever happened.

My abs module has gone out, giving me an unsafe Jeep Patriot, now with zero abs or traction control, major issue in tampa driving! apparently, according to the dealer here, they're on "galactic back order" for a few years now; I couldn't even find one at a used parts store in the area. . . Had to resort to ebay, having it installed at the dealership this week, who says they'll install it (janet) but they won't guarantee they can program it and it will reset those dash lights?!?! they can't guarantee it? then something needs to be figured out to guarantee I have a working Jeep, complete with abs and traction control. This is a major, according to several people I've spoken with but there's no recall? if something is on back-order for the dealership for years, something needs to be done, you have Jeep customers riding around unsafely in vehicles they purchased with safety features, feel free to call for more details. Shane shephard 540-355-7777 p. S. I'll have a receipt after I go to the Jeep dealer this week, have it installed with no guarantee, but it'll be in. . . Might not work, but it'll be in. . . And that's good enough?!?!?!?!.

While driving my vehicle on the highway the car turned off and I was unable to steer and/or turn the car back on. After I managed to get to the side of the road and then I managed to get it re-started. I took it to the dealership as it had a check engine light. The crankshaft electrical had thrown a code and I was advised to not drive my vehicle due to safety issues of the car "turning off" again without warning and that it could cause a crash. There were no previous warnings from my vehicle prior to this incident. I was given information from the service advisor for Chrysler recall s89-NHTSA 16v-907 but he stated that my vehicle didn't have that recall attached to it. The service advisor told me to report the issue to the NHTSA to get my vehicle inspected as he feels it should be included in the recall.

I have a 2016 Jeep Patriot that I purchased with very little miles on it used. Starting about 2 weeks ago I had an incident on the highway going 60mph and it just shut off and lost all power for a few seconds and started back up on its own. When this happened my steering got hard, brakes didnt work properly and could not accelerate. Was very scary and has been doing it more frequently now. This is a serious safety hazard for myself and others around me. I saw that there is a recall s89 for this model but mine is not within the dates and this makes no sense as it is the exact same problem. I ask that you respectfully reissue this recall to include a wider range of dates. Not to mention it is a fairly expensive repair that has to be done and should be taken care of by the manufacturer.

Traction light will come on intermittently and abs and brake lights will flash and go away intermittently and all lights on dash and headlights will dim, radio shuts off, rpms will drop to 0 then go back to normal all while driving. Both camshaft sensors have been replaced twice in under a year. All spark plugs have been replaced twice in under a year as well as the crankshaft sensor. Something is constantly draining my battery (headlights are set on auto and interior lights are always set to off) there was a recall for camshaft/crankshaft wiring but my vehicle was not included in the recall.

While driving down the road at night the headlights and dash lights go off for about a couple of seconds and then come back on. When this started happening the radio also stopped working in the vehicle.

Vehicle stalls and doesn't start. Would also occasionally shake and the check engine light comes on. Throttle body was replaced less than 1 year ago and it is currently not starting due to the same issue. Needs another throttle body. It's the position sensor that seems to go bad due to all the heat generating around it. Both times it really acted up once the weather warned. Unfortunately you can't just replace the sensor, the whole throttle body needs replaced. At $350 each from the factory. Online it seems like a lot of people are having the same problem.

Problems started when the wheel and axel came off the vehicle on a side road 3 years ago. The vehicle dropped a wheel again when crossing the country a month later. Both incidents included my wife and passengers. That at least seems resolved. At 28900 miles or so we have been wrestling for the last year and some with intermittently all the warning lights coming on and now the car will occasionally lose all power while in motion. So we have taken it to the dealership where they say it requires a replacement of the electrical harness. Topping off, the driver seat rest safety mechanism deployed randomly this last week while the vehicle was parked in the driveway.

I believe it's the engine or could have something to do with fuel. Car shuts off while in idle, mainly while sitting at a red light it shuts off/down completely. I then have to turn the switch to the on position to recrank it. It starts with no problem at all. Happens almost everyday. I've taken it to have it checked and they can't find any issues. It's been this way since I've gotten the car. Still no one can find the problem.

My Jeep began having a few second stall and restart while driving randomly late 2020. I’m the last 6 months it stalls for longer periods of time but I initially was able to put it in neutral and restart it. About 4 months ago it became more and more difficult to start after I would be forced to pull to the side of the road with no power, hard steering and hard brakes. The check engine light came on at one point. I called the dealership and it was suggested that I take the Jeep in. The diagnostic code indicated the crankshaft position sensor (p0339). But the check engine light wasn’t flashing and it was late in the afternoon so I had to make an appointment to take it back. After 4 days the check engine light went off. The stalling just got very frequent. I would put it in park and turn the ignition repeatedly and after several minutes it would regain power. Just over 1 month ago it stalled in the middle of a busy intersection during afternoon rush hour. It had to be pushed out of the intersection. After more than 10 minutes of continued ignition turns it started and I made it 3 blocks to home and parked it. I had it towed to the same dealership 5 days ago. The crankshaft position sensor has to be replaced. I’ve done research over the last 48 hours and found there was a recall for some 2016 Jeep Patriots for the crankshaft position sensor because it was a safety problem. I’ve checked my VIN number and there has been no recall for this on my vehicle. However, my Jeep Patriot is a 2016 with the exact same problem the the recall was initiated for. Please help me with this if you’re able to. I don’t know where else to turn.

Vehicle keep stalling or losing power. We brought the Jeep to the dealer and they replaced the crankshaft and camshaft position connectors. The Jeep was "repaired" and the problem persisted. We returned the Jeep to the dealer and they replaced the sensor. All in all the Jeep was in the shop for 2 weeks. We were informed that there was a recall on other models. The vehicle was manufactured during the same period (may 19th 20216) as the other Jeeps but they did not repair it without charging us $858. 00 we tried to go through the company but they did not want to hear our concerns. The recall department was adamant that if the VIN number was not listed they could not help us. We are seeking relief and wish our vehicle to be included in the recall, since it was built during the time frame and that they had to replace that same defective part.

The SUV uses large amounts of oil, no matter what brand. Also an electrical issue is present. The radio stops working, thr check engine light stays on. And the headlights dim way down. This happens randomly. The engine code reappears for p420, and I have fixed every component related to the code. The SUV consumes approximately 2 quarts of oil in a months driving. The headlights dim so low, even with brights on, you can barely tell they are on.

On several different occasions my car has stalled in traffic and idled down for I couldn't drive had to pull over and turn it off and turn it back on to go again the check engine light then stability light will come on. Camshaft code I have fixed the cam and crankshaft sensors first time then it failed again so I changed them a second time now it's failed again . I almost got rear-ended a couple times very dangerous. Now my step button on the steering wheel and the horn quit working all of a sudden. I found out on the site of mopar that it is the electrical connector and terminal both cam sensors and crank sensors on certain VIN numbers,all 2016 Jeep Patriots should have been included as others are having the same issues. I cannot afford to keep on putting money into this problem. This can be confirmed by my mechanic which replaced it twice. The dates this has happened are April 2023 worked for awhile then February 2024 happened again changed cam and crank sensors again. April 16 started failing again, limp mode have to pull over turn engine off turn it back on to go again. Every week at first now every few days. Engine light then traction stability light can't go over 10 miles per hour, pull over turn engine off turn it back on stability light goes off but engine light stays on for a day goes off the next day. I do not feel safe driving long distance anywhere and this can wear down your engine and vehicle life. I bought this car paid a lot of money for it for the comfort of knowing I would have something dependable in my old age and can not keep on putting money into a problem that should have been on the recall list also. It only has 115,000 miles on it. I'm going to the Jeep dealer next week to see if mopar can resolve this and pay for this issue. Also this happens if you're going 1 to 55 miles per hour reverse or forward doesn't matter.

Like many other Jeep Patriot owners, I have experienced driving down the road when out of nowhere, the car dies! mechanics keep telling people that either the camshaft position sensor or the crankshaft position sensor needs to be replaced. . . . . . It's a temporary fix. The code that comes up says that the sensor is intermittent. It's not the sensor that's the problem, it's the wiring connectors!!! those two sensors are on the same harness. I've had all three sensors replaced. Right after, the car drives fine. Very soon after, the car stalls while driving. Back to square one. They need to recall the sensor wiring for these two sensors for all 2016 Jeep Patriots.

To whom it may concern I purchased a 2016 Jeep Patriot sport on may 21 2022, the vehicle since date of purchase has been stalling at acceleration speeds of 65 mph, as well as in reverse while parking while idle at stop light and stop sign upon stalling no warning lamp has been present. I have contacted multiple Jeep dealerships upon getting a diagnostic for this matter as well as recalls, I was told by Jeep by customer service that they did not do recalls on the 2016 models any longer. In the mist of trying to get it serviced , by Jeep the vehicle was serviced 3 times in total by nyc automart with no avail. The crank shaft sensor was changed by nyc automart twice still no solutions.

The check engine light keeps coming on and it the codes keep saying it’s the throttle pedal position sensor a/b circuit.

The car's engine will shut off without notice. Sometimes it happens when the car is in park, but more problematically, it happens on the highway or at intersections (there is no discernible pattern to what triggers the failure) . Additionally, when the engine shuts off, the wheel and pedals stiffen up, making pulling into a breakdown lane difficult. This is an issue that has been resolved before by replacing the crankshaft sensor after identifying there was an issue with it via check engine light/code. (there have been previous recalls for the crankshaft sensor for these Jeep models. ) however, after replacing the crankshaft sensor on two separate occasions, the issue is surfacing again. Dealers have no way of rectifying this very severe issue until there is a code that emerges, forcing myself to continue driving a vehicle that can shut off at any given moment until it happens frequently enough for the issue to either be replicated in their hands, or for a code/check engine light to emerge.

The throttle body goes out every few months. The vehicle will suddenly go into limp mode while driving. This is dangerous as it rapidly decelerates in traffic!.

Crankshaft position sensor. Engine stalled in traffic. Had to stop, place car in park, turn engine off and then back on. Independent mechanic has confirmed issue. Error code p0335. Vehicle has not been inspected by manufacture or others. Engine has stalled previously with no warning signs. Symptoms have been present since purchase.

Jeep sucks so does dealership.

Vehicle unable to reach speed above 30mph. Electronic throttle control (etc) symbol shows up in error on dashboard. Unable to accelerate beyond 30mph. Vehicle drives with unstable and jerky motions. Have had this issue before and dealership mechanic reset computer, downloaded a system update to solve issue. This occurred about 2019. Issue has represented itself.

While slowly accelerating from a stop, my 2016 Jeep Patriot engine stalled in the middle of a busy intersection. I lost power steering and & brakes and was luckily able to muscle the car over to the side of road out of traffic. I waited several minutes and restarted the engine which then operated normally afterward. This engine stalling has occurred repeatedly & more frequently (6+ times in last 10 days) while accelerating from a stop which is very dangerous in cross-traffiic intersections and on freeways. Additionally now, the engine rpm’s intermittently surge notably up and down +/- 2,000 rpm while driving with steady un-changing pressure on gas pedal. I have seen no engine failure indicators. I have had this vehicle serviced at two different independent repair shops that couldn’t re-create the problem & guessed it was the throttle body and then cleaned/serviced it. The problem persists more frequently, and is the exact problem listed in the s89 chryslerjeep recall. My VIN is not referenced in the recall notice-even though it is from the same Jeep manufacture period. This recall should definitely apply to my vehicle. I drive 40 freeway miles daily to work and am concerned for my safety and others. My vehicle is available for inspection if needed and I am bringing it tomorrow to a Jeep dealer in hopes of having it repaired under the recall. As the original new owner, I strongly feel that Chrysler Jeep needs to apply this recall to my vehicle and support their owner’s safety.

Head lights continue to dim way down. And now they flicker occasionally. Has not been looked at by anyone except a mobile mechanic. There is no warning, it doesn't happen only over bumps, it happens very randomly, and you never know when. Ive has the mobile mechanic add a set of led lights because the headlights dim way down, to the point that the bright lights barely light the road to see. No certain dates, it happens randomly, many times since I've owned it, since 2021.