Anti-lock Brakes Fail problem is a common vehicle problem that happens to most car brands and models. The following is a sample list of Anti-lock Brakes Fail problems reported in most popular vehicles.
Crash was involved with this problem. The vehicle involved is a 2010 Chevrolet Cobalt. The contact stated that the vehicle power steering failed while driving approximately 35 mph. The vehicle independently traveled across both lanes, crashed into a curb and then into an embankment before stalling. The air bags failed to deploy and the vehicle was destroyed. The contact sustained injuries to the left side of the body and a police report was filed of the incident. The manufacturer inspected the vehicle and determined that the anti-lock brakes had failed however, did not provide a reason as to why the vehicle stalled. The approximate failure mileage was 45,744. This anti-lock brakes fail issue occurred 09/11/2012.
See
all problems of Chevrolet Cobalt and
all Anti-lock Brakes Fail problems of Chevrolet Cobalt.
The car involved is a 2004 Chevrolet Silverado. The VIN of the car is 1GCHK29U84_. The vechicle's anti-lock breaks failed!. This anti-lock brakes fail problem happened on Sep. 6, 2012.
See
all problems of Chevrolet Silverado and
all Anti-lock Brakes Fail problems of Chevrolet Silverado.
The vehicle involved is a 2001 Chrysler Sebring convertible. There was crash involved with this problem. Anti-lock brake failure. Hit black ice and started to skid. Applied moderate and then heavy pressure to the brake pedal. Wheels locked up without the anti-lock feature engaging at all, inducing loss of control, resulting in spin and crash. It was Jan. 18, 2006 when this anti-lock brakes fail issue occurred.
See
all problems of Chrysler Sebring and
all Anti-lock Brakes Fail problems of Chrysler Sebring.
The car had a crash. Tl- the reporting person owns a 2000 Dodge Neon. The contact stated that while attempting to stop the vehicle, the anti-lock braking system failed and caused her to crash into the rear of another vehicle. The seat belts did not properly restrain and the air bags did not deploy. The contact and a passenger were reported injured and transported to the hospital via ambulance. The police were notified and a police report was filed. The vehicle was severely damaged and towed to the contact’s residence. The manufacturer was notified of the failure who advised that there was an open recall on the vehicle for the brakes (NHTSA campaign id number: 01v154000-service brakes, hydraulic: power assist: vacuum) but not for the seat belt and air bags. The vehicle was not repaired. The VIN was unknown. The failure mileage was 129,000. Kmj. It was Monday, December 26, 2011 when this anti-lock brakes fail issue happened.
See
all problems of Dodge Neon and
all Anti-lock Brakes Fail problems of Dodge Neon.
The car involved was a 1997 Dodge Stratus. Crash happened when the problem occurred. The VIN of this vehicle is 1B3EJ46X1V_. Antilock brakes failed twice. The second time on 08-11-99 I rear-ended another vehicle. Chrysler has been asked to investigate also, but don't know if they will decide against their own product. Would appreciate your help. This anti-lock brakes fail issue occurred August 11, 1999.
See
all problems of Dodge Stratus and
all Anti-lock Brakes Fail problems of Dodge Stratus.
The car involved is a 1999 Ford F-450 sd. There was crash involved with this problem. The vehicle's vehicle identification number (VIN) was 1FDXF46S5X_. Anti-lock brakes fail to stop truck in rain/snow conditions. It was Mon., Oct. 30, 2000 when this anti-lock brakes fail issue occurred.
See
all problems of Ford F-450 and
all Anti-lock Brakes Fail problems of Ford F-450.
The vehicle having this issue was a 1998 Ford Windstar. The VIN of this vehicle is 2FMDA5145W_. Anti-lock brake system failed. This problem occurred on Thursday, Oct. 1, 1998.
See
all problems of Ford Windstar and
all Anti-lock Brakes Fail problems of Ford Windstar.
The car is a 2001 GMC Yukon xl 1500. The VIN of the car is 3GKEC16TX1_. Antilock brakes failed; warning light on dash after incident. It was 03/03/2014 when this anti-lock brakes fail issue happened.
See
all problems of GMC Yukon and
all Anti-lock Brakes Fail problems of GMC Yukon.
The VIN of the problem Sierra 1500 is 3GTEC14X66_. The vehicle involved is a 2006 GMC Sierra 1500. The contact stated that when depressing the brake pedal, he would experience a vibrating or popping feeling. The vehicle was taken and inspected by an independent mechanic, who stated that the anti-lock braking system failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified, but offered no assistance. The failure mileage was approximately 75,000. This issue happened on Mon., May. 30, 2011.
See
all problems of GMC Sierra 1500 and
all Anti-lock Brakes Fail problems of GMC Sierra 1500.
The vehicle involved was a 2008 Acura Tsx. The anti lock brakes fail to hold during braking on uneven pavement (e. G. , potholes) in wet or dry conditions. On numerous occasions I have found myself gripping the steering wheel in fear of rear-ending the vehicle in front of me while applying brakes in an even fashion in traffic and/or stop lights. I have complained to radley Acura (in falls church, va) on several occasions. Most recently, I voiced my concern during a scheduled maintenance visit on Friday, 26 March 2010. The brakes did not "brake" as I applied pressure to pedal through broken pavement on an "urban" road. The car barely missed hitting the car in front of me. This most recent incident occurred in dry conditions. This anti-lock brakes fail problem happened on Mar. 26, 2010.
See
all problems of Acura TSX and
all Anti-lock Brakes Fail problems of Acura TSX.
Vehicle identification number (VIN) of the vehicle is 5FNRL38877_. The vehicle is a 2007 Honda Odyssey. The contact stated that the antilock brakes were failing on her vehicle. The vehicle does not stop when the brake pedal is depressed and rolls four to five additional feet before finally stopping. If the vehicle is on an incline, it rolls back even though she is depressing the brake pedal. The vehicle was taken to the dealer and they stated that the brakes were designed to perform in that manner. The contact added that the vehicle always rolls back when pressure is applied to the brake pedal, which is unsafe. The failure mileage was 9,508. The failure date was Saturday, May 30, 2009.
See
all problems of Honda Odyssey and
all Anti-lock Brakes Fail problems of Honda Odyssey.
The vehicle is a 1999 Honda Odyssey. The VIN of this Odyssey is 2HKRL1856X_. Antilock brake failure. It was September 24, 1999 when this anti-lock brakes fail issue occurred.
See
all problems of Honda Odyssey and
all Anti-lock Brakes Fail problems of Honda Odyssey.
The car involved is a 2013 Hyundai Elantra. There was crash involved with this Hyundai Elantra. Vehicle identification number (VIN): 5NPDH4AE7D_. During merge onto a major dallas tollway, traffic became stopped in the right lane and upon applying a hard brake of my car, the anti-lock brakes failed to engage, the seatbelt did not lock, my car felt as though it was accelerating even though I was pressing the brake pad hard. I hit the car in front of me once and then again before my car stopped, still running. My car sustained $8500 in damage to the front end, but the air bag did not even deploy. I have owned it for 15 months and have not had an issue of this nature in the past, however I am now concerned of the safety of this vehicle. This anti-lock brakes fail problem happened on 01/23/14.
See
all problems of Hyundai Elantra and
all Anti-lock Brakes Fail problems of Hyundai Elantra.
The car is a 2010 Hyundai Accent. The vehicle had a crash. The VIN of this Accent is KMHCN3ACXA_. I was approaching a line of cars stopped at a red light and it was raining. When I applied my brakes the rear wheels of my anti-lock brake system failed and the rear wheels locked up. I slid out of control into the rear of the car in front of me. This issue happened on April 4, 2012.
See
all problems of Hyundai Accent and
all Anti-lock Brakes Fail problems of Hyundai Accent.
The vehicle having this issue was a 1996 Jeep Grand Cherokee. Vehicle identification number (VIN) of the vehicle is 1J4EX58S1T_. Anti-lock brakes failed, causing accident. This anti-lock brakes fail issue occurred Sat., Jan. 11, 1997.
See
all problems of Jeep Grand Cherokee and
all Anti-lock Brakes Fail problems of Jeep Grand Cherokee.
The vehicle was a 1996 Jeep Cherokee. Anti lock brakes failed prior to recall repair.
See
all problems of Jeep Cherokee and
all Anti-lock Brakes Fail problems of Jeep Cherokee.
The vehicle having this issue was a 1996 Land Rover Range Rover. The VIN of the car is SALPE1247T_. Antilock brakes failed. This anti-lock brakes fail problem happened on September 1, 1996.
See
all problems of Land Rover Range Rover and
all Anti-lock Brakes Fail problems of Land Rover Range Rover.
The vehicle involved was a 1996 Lincoln Town Car. The vehicle's vehicle identification number (VIN) was 1LNLM,82W1_. Anti lock brakes fail continually.
See
all problems of Lincoln Town Car and
all Anti-lock Brakes Fail problems of Lincoln Town Car.
The car involved was a 2008 Mazda Mazda5. There was crash involved with this Mazda Mazda5. The vehicle involved is a 2008 Mazda5. The contact was driving approximately 40 mph. The brake pedal was applied with excessive force and the antilock brake system failed to activate. The vehicle continued to accelerate and crashed into the rear of another vehicle. The contact sustained injury to his right foot. The vehicle was towed to a body shop. The entire front end of the vehicle was damaged. There was deployment of the air bags during the crash. A police report was not filed. The manufacturer will be notified of the failure. The failure mileage was 25,143. This issue happened on 04/11/10.
See
all problems of Mazda MAZDA5 and
all Anti-lock Brakes Fail problems of Mazda MAZDA5.
The vehicle was a 1998 Mercedes Benz Ml320. The VIN of the car is 4JGAB54E7W_. Anti lock brakes failed resulting in a collision. It was Tue., Mar. 10, 1998 when this anti-lock brakes fail issue occurred.
See
all problems of Mercedes Benz ML320 and
all Anti-lock Brakes Fail problems of Mercedes Benz ML320.
The car is a 1997 Mercury Villager. The vehicle identification number (VIN) of the car was 4M2DV111XV_. Anti lock brakes fail intermittently, one incident resulted in a vehicle collision.
See
all problems of Mercury Villager and
all Anti-lock Brakes Fail problems of Mercury Villager.
The car is a 2002 Mercury Mountaineer. The VIN of this vehicle is 4M2DU86W02_. The anti-lock brake system failed. It was serviced but the service technician stated it needed a new part to make the brakes effective. Provide further details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
See
all problems of Mercury Mountaineer and
all Anti-lock Brakes Fail problems of Mercury Mountaineer.
The vehicle involved was a 2007 Mitsubishi Outlander. The vehicle had a crash. The vehicle's vehicle identification number (VIN) was JA4MS31XX7_. Mitsubishi 2007 Outlander LS SUV
anti-skid anti-lock system fail on 440n hwy in NJ and my SUV collided in to other car and it was not big damage but Outlander burst in to flames and caught fire within one minute I was able to get out otherwise I will be a dead man need to push Mitsubishi to start investigation on SUV failure. This anti-lock brakes fail issue occurred 03/23/08.
See
all problems of Mitsubishi Outlander and
all Anti-lock Brakes Fail problems of Mitsubishi Outlander.
The vehicle involved is a 1996 Mitsubishi Galant. The VIN of this vehicle is 4A3AJ46G0T_. Antilock brakes failed, causing accident. This anti-lock brakes fail problem happened on 11/30/96.
See
all problems of Mitsubishi Galant and
all Anti-lock Brakes Fail problems of Mitsubishi Galant.
The vehicle having this issue was a 2013 Nissan Pathfinder. Brake failure - anti-lock brakes failed - preventing car from stopping. I was pulling into a dirt parking lot - stepping on the brakes - anti-lock brakes kicked in, brake pedal became hard and wouldn't press down anymore - truck wouldn't not slow down. I was heading towards trees - I immediately took my foot completely off the brake pedal and stepped on the brake as hard as I could - truck stopped just short of the trees. . I have ran into similar situation in snow - definitely still a major brake problem. Also rotors were warped at 17k miles. We also had a major problem after leaving the truck at the airport for a week - it felt like the calipers were extremely warped and metal on metal grinding - - this scared my wife and kids really badly. . It took at least 3 miles for the brakes to feel a little better. . I shut off my truck - got out - closed the doors and the doors wouldn't lock. I could see a error on the dash board showing the car remote. I tried several times to lock the door and kept getting the same error. I got back into the truck and restarted it - then shut it off - got out and the doors would lock. The dealer already did the service bulletin update for the anti-lock brakes in March - and it evidently didn't work. I have had numerous problems with the remote - getting in to the truck and starting the truck. I have had times I remote started the truck, then couldn't get in. . I had to hit the lock and unlock key several times before I could get into the truck. . Then the truck wouldn't allow me to hit the power button - stating wrong key id. . This problem occurred on Saturday, May 10, 2014.
See
all problems of Nissan Pathfinder and
all Anti-lock Brakes Fail problems of Nissan Pathfinder.
The vehicle involved is a 2003 Nissan Xterra. The VIN of the car is 5N1ED28Y13_. Brakes failed and the abs didn't work until I almost hit another car in front of me. The abs triggers without any notice and has cause me to merge onto the other lane. Cause my car does not stop. The abs light doesn't go on so the manufacturer Nissan told me they couldn't find any problems with it. And its sitting at a local trustworthy mechanic shop where it will be fixed for the service brakes air-antilock brake failure. Please help with a rapid recall so my family could get reimbursed for the huge expense of fixing a manufacturer problem. This anti-lock brakes fail issue occurred Tuesday, Sep. 6, 2011.
See
all problems of Nissan Xterra and
all Anti-lock Brakes Fail problems of Nissan Xterra.
The vehicle involved was a 1996 Saturn Sl1. Crash was involved with the Saturn Sl1. Antilock brakes failed, causing accident/injury. This anti-lock brakes fail issue occurred Fri., Apr. 12, 1996.
See
all problems of Saturn SL1 and
all Anti-lock Brakes Fail problems of Saturn SL1.
The vehicle is a 2005 Subaru Legacy. While driving 25 mph, the antilock brakes failed. The consumer wanted the dealer to disconnect the abs (anti-lock brake system) but stated that they were not allowed to perform that type of repair at the owner's request. The VIN was unknown. The failure and current mileages were 34,000. Updated 02-14-08
updated 02/14/08. This anti-lock brakes fail problem happened on 01/13/08.
See
all problems of Subaru Legacy and
all Anti-lock Brakes Fail problems of Subaru Legacy.
The vehicle involved is a 1997 Subaru Legacy. The VIN of the car is 453BD4354V_. Anti lock brakes fail continuously, when applying brakes they lock up. The failure date was 09/23/97.
See
all problems of Subaru Legacy and
all Anti-lock Brakes Fail problems of Subaru Legacy.
The car is a 2004 Suzuki xl-7. : the contact stated the antilock brakes failed while driving 40 mph in snow without warning. There is a NHTSA recall, # 05v452000, regarding the service brakes hydraulic. The vehicle has the same problems as indicated in the recall; however it is not included in the recall due to the VIN. The failure date was February 17, 2006.
See
all problems of Suzuki XL7 and
all Anti-lock Brakes Fail problems of Suzuki XL7.
The vehicle is a 2010 Toyota Prius. The VIN of the car is JTDKN3DU5A_. The brake booster pump began running continuously when the vehicle was on. Warning lights on the dash indicated brake failure and anti-lock system failure. After I took the vehicle to a Toyota dealer, they determined that the brake master cylinder/anti-lock assembly had failed. The repair took two weeks and cost $3000. This issue happened on Sat., Mar. 30, 2013.
See
all problems of Toyota Prius and
all Anti-lock Brakes Fail problems of Toyota Prius.
The vehicle is a 2007 Toyota Yaris. The contact stated that the antilock brakes failed while driving approximately 10 mph in inclement weather. When the brakes were applied there was a loud noise and the brakes would not stop the vehicle. The vehicle was taken to the dealer and tested; yet, they stated that there was no failure. The failure mileage was 27,300. This anti-lock brakes fail problem happened on 01/28/10.
See
all problems of Toyota Yaris and
all Anti-lock Brakes Fail problems of Toyota Yaris.
The vehicle involved was a 2006 Volkswagen Passat. Antilock brake system failed causing the brakes to automatically come on. Led to rapid deceleration while driving. Ongoing problem. This anti-lock brakes fail issue occurred Saturday, February 6, 2010.
See
all problems of Volkswagen Passat and
all Anti-lock Brakes Fail problems of Volkswagen Passat.
The VIN of this vehicle is WVWMA63B6X_. 1999 Volkswagen Passat - in the anti lock brake system. A warning light had come on along with a beeping sound. The consumer had taken the vehicle to the dealer and they suggested that this was a common problem with the Passat. The consumer researched this matter and realized that there were other similar complaints, then called the manufacturer. Thee manufacturer stated that there was no recall on this problem and had not fixed it as of yet. The consumer had not experienced any other problems except with the warning light and the beeping sound. (12/08/05) the antilock brake system failed daily. This problem occurred on September 10, 2005.
See
all problems of Volkswagen Passat and
all Anti-lock Brakes Fail problems of Volkswagen Passat.
The vehicle is a 1998 Volvo V70. The vehicle identification number (VIN) is YV1LZ5648W_. While traveling on the highway, the air message appeared on the dashboard and codes were not correct. Dealer was aware of the problem. Ts the computer chip on the anti lock braking system failed. The mechanic stated that there were several other vehicle with the same problem. Volvo wouldn't repair the vehicle under warranty. The failure date was Oct. 11, 2002.
See
all problems of Volvo V70 and
all Anti-lock Brakes Fail problems of Volvo V70.
The car involved is a 1996 Volvo 960. Anti lock brakes failed resulting in vehicle collision.
See
all problems of Volvo 960 and
all Anti-lock Brakes Fail problems of Volvo 960.
The vehicle is a 2000 Audi A4. The vehicle's vehicle identification number (VIN) is WAUDH28D0Y_. There are hundreds of complaints online about the anti-lock braking failing in Audi's and vw's built between 1996 and 2001. According to my mechanic, this is a very common problem that they've seen a lot of. It was Jan. 30, 2009 when this anti-lock brakes fail issue happened.. Read more...
See
all problems of Audi A4 and
all Anti-lock Brakes Fail problems of Audi A4.
The vehicle involved is a 1998 Audi A4. The vehicle identification number (VIN) is WAUED28D3W_. Anti lock braking system failure, goes into non-antilock mode. The failure is constant, it fails everytime the car is started. This anti-lock brakes fail problem happened on April 10, 2004.
See
all problems of Audi A4 and
all Anti-lock Brakes Fail problems of Audi A4.
The vehicle involved is a 2001 BMW 330xi. The vehicle's vehicle identification number (VIN) is WBAAV53411_. In snowy conditions the anti-lockbrakes failed, causing vehicle to skid. The tires had 1/2 tread life. The dealer blamed the tires. (tire, anti-lock brakes, and or awd was the problem). It was Dec. 1, 2003 when this anti-lock brakes fail issue occurred.
See
all problems of BMW 330 and
all Anti-lock Brakes Fail problems of BMW 330.
The vehicle having this issue was a 1996 Buick Skylark. Anti lock brakes fail to engage.
See
all problems of Buick Skylark and
all Anti-lock Brakes Fail problems of Buick Skylark.
The vehicle involved was a 2002 Buick Rendezvous. Vehicle identification number (VIN) of the vehicle is 3G5DA03E32_. Anti-lock break sensor failed which caused excessive movement in the break pedal when stopping. In addition, this sensor caused the traction control system to disengage and created difficulty in stopping the vehicle. In some instances the break pedal would depress all the way to the floor of the vehicle when attempting to stop. Buick would not honor the warranty on this part. As a result, I paid $700 for the repair on this part. This issue happened on May. 1, 2005.
See
all problems of Buick Rendezvous and
all Anti-lock Brakes Fail problems of Buick Rendezvous.
The car involved was a 1998 Cadillac Seville. The VIN of the problem Seville is 1G6KS54Y5W_. Steering assembly mechanism failed in 1998, resulting in the inability to steer, anti lock brakes failed may 1999. Accident occured resulting in injury. (attorney for consumer). Mjs. This anti-lock brakes fail issue occurred 05/01/99.
See
all problems of Cadillac Seville and
all Anti-lock Brakes Fail problems of Cadillac Seville.
The car is a 1999 Cadillac Deville. The vehicle had a crash. On two separate occasions anti lock brakes failed, allowing vehicle to continue forward, and rear ending another vehicle. A policeman came, and drove vehicle when brake pedal descended to the floor. After repairs, brakes failed again several days later. Please describe details.
See
all problems of Cadillac Deville and
all Anti-lock Brakes Fail problems of Cadillac Deville.
The vehicle involved was a 1999 Jaguar Sedan Range. Crash was involved with this problem. Vehicle identification number (VIN) of the vehicle is 1J4FY49S4X_. On 07-24-2000 I was forced to slam on my brakes to try to avoid hitting the rear end of a Chevrolet s-10 pickup truck . My anti-lock brakes locked up and I skidded about 20 feet before impacting the rear of the s-10 who had already hit a red van that slammed on brakes to avoid a dog. Upon impact, my air bags did not deploy. Both my passanger and I were wearing seatbelts. My passanger sustained whiplash and both legs were injured from underneath dash board. I also sustained whiplash to my neck and back. I reported the anti-lock brake and air-bags failures to daimler-Chrysler manufacture. I was told a safety inspector would contact me. He did. His name was don wade. He wanted me to drive the Jeep to a dealership but I told him he could come to my home as I was afraid to drive the vehicle as it was already a safety hazard from mechanical problems Chrysler refused to fix and now with the anti-lock brakes failing and air bags not deploying, I was afraid to put it on the road. I also told him I was afraid if I hit a bump or pothole in the road, the air bags would deploy since they didn't upon impact. He is supposed to call me again within the next two days and he was not very nice at all. Chrysler has already violated a mediation decision on this vehicle and now there are these safety issues as well. I do not trust daimler Chrysler, their dealerships, especially crossroads Jeep in indianapolis since they have already lied and refused to honor the mediator's supposedly binding decision on previous safety issue with this vehicle. The failure date was Jul. 24, 2000.
See
all problems of Jaguar Sedan Range and
all Anti-lock Brakes Fail problems of Jaguar Sedan Range.