Ten problems related to brake grinding noise have been reported for the 1997 Toyota Camry. The most recently reported issues are listed below.
Brakes making a grinding noise. Have had replaced three times, the first time under a manufacturer replacement bulletin. The 2nd time the brakes were replaced was in 6/99 (bryan easler Toyota. . . Excellent service). Third time the brakes were replaced -- 9/2000 at 55,000 miles (Toyota of concord). Grinding noise has started again -- 4 months after replacement with only 8,000 miles on them. I can't believe I've owned this car 3. 5 years and have had to replace the brakes so many times. I believe Toyota needs to be held responsible for this problem. A friend, also with a '97 Camry, has the same problem. If it were a cosmetic problem, it would be no big deal. But these are brakes -- a major safety factor. Any help to get this resolved will be appreciated.
Intermittently when brakes are applied there is a loud grinding noise coming from the front brakes, restuling in extended stopping distance. The dealer has inspected vehicle twice.
Brakes make a grinding noise and do not work properly, also front shock absorber were installedmexhaust front pipe was installed.
Brakes make a grinding noise and fail to work properly. The pads were replaced once and cleaned a second time and are currently making more noise.
Whenever the brakes were applied, vehicle would not stop right away. Would make a grinding noise each time brakes are applied. Talked to dealer & manufacturer, but nothing will be done.
Could hear grinding noise when applying brakes at 40mph; took to dealer & mechanic took for test drive; had same problem; had calipers, pads & rotors replaced. Problem still exists.
When applying abs brakes and coming to full stops, brakes have a loud grinding noise. The noise is intermittent.
A grinding noise occurs within the abs braking system. Dealer states the brakes are working properly. However, a part is being manufactured to remedy the grinding. Also on one occasion when applying the brakes in normal conditions, the pedal traveled to the floor , causing extended stopping distance.
When applying the abs brakes in any type of weather or speed, the brakes make a grinding noise and there is extended stopping distance. Please provide details.
Upon depressing the brake pedal, consumer noticed a loud grinding noise coming from the front end. Consumer has contacted the dealer, dealer has replaced parts. Problem still occurs.