One problem related to transmission failure has been reported for the 2010 Chrysler Town & Country. The most recently reported issues are listed below. Please also check out the statistics and reliability analysis of the 2010 Chrysler Town & Country based on all problems reported for the 2010 Town & Country.
Transmission failure of the 62 te transmission. Transmission would not shift and went into limp mode with multiple sensor codes thrown. This occurred while driving on the express way, approximately traveling at 70mph during rush hour. Transmission required multiple hard part replacement. After rebuild transmission had hard shifting went into limp mode again after 3 days from shop, again while on express way. Codes p0792, p0732, p0735, p0721. Transmission required another rebuild this time after 1 day out of the shop transmission experienced hard shifting however this time would not up shift stayed in 1st gear. Transmission fluid is at the proper level for the transmission fluid temp per manufacture. Codes p0792, p0732 and p0735 is present. Replaced sensors and cleared codes replaced trans fluid. Trans worked would well for 6 miles while on a major state road, then while accelerating from a stop it would not up shift again and the same three codes are present.