Steering Tie Rod Assembly Problems of Ford Expedition - part 2

Traveling approx. 25 miles per hour, vehicle steering failed due to broken tie rod on front passenger side and broken stabilizer bar on driver side. Vehicle had been at dealers twice in previous week for all 4 tires to be balanced and for steering vibration.

See all problems of the 1999 Ford Expedition 🔎.

While driving, vehicle will bounce. Contacted dealer. This was a result of the tie rod having too much play.

See all problems of the 1997 Ford Expedition 🔎.

Both tie rod ends were broken and replaced by a repair shop. Dealer notified. Feel free to provide any further information.

See all problems of the 1998 Ford Expedition 🔎.

Tie rod end separated at the knuckle, causing vibration and left front tire and wheel turning in and making the vehicle undriveable.

After making a right turn off a major parkway in westchester county NY, where we had been traveling at 60 mph, I made a right turn at exit . After proceeding 25 feet, a horrific noise was heard, the car lost steering ability and shook and bucked wildly. Hit a tree on roadside and came to rest. Found that the left tie rod ball joint completely separated and the left wheel had no steering at all. The incident would have killed my entire family had it happened at highway speed. This should not be possible. Prior to this, last year, both sway bar links fractured, also resulting in a near crash situation. This vehicle needs to be investigated. It is a death machine on wheels!!!!.

The truck began to pull to the right, then the tie rod broke from the wheel.

Inner tie rod had to be replaced on the driver's side. Five month ago, out tie rod had to be replaced. Problem was due to no grease fitting. Dealer was notified. Feel free to provide any further information.

Consumer was driving on highway and prepared to exit on off ramp when left driver's side tie rod separated from vehicle and entered the wheel well which caused vehicle to come to a violent halt. Vehicle was towed to dealer, and dealer confirmed tie rod broke. Inspected right side, and said that tie rod was near failure as well. Repairs were made. That was second time in 3 years that tie rods were replaced. The first time it was under warranty, and the second incident was not covered under warranty. Consumer was upset that these parts t failed. Had not occurred under normal wear and tear circumstances. This was street and highway driving, no rough wear on the vehicle.

While driving 10 mph, left inner tie rod end broke, causing loss of vehicle control.

While backing out consumer heard a dragging sound, tie rod end broke.

Stabilizer bar end links were broken in half and had to be replaced. In addition at approx. 60,000 miles during 2000 c. Y. All ball joints and tie rod ends had failed and had to be replaced at the cost of over $1600. 00. The "lube-for-life" design for these components is a farce. They were rusted and warn out and created an unstable front suspension and steering situation. This vehicle has seen no off-road driving.

Left and right tie rods broke off while consumer was driving, and consumer could not control the vehicle. Contacted dealer, and the dealer fixed the problem. *akboth tie rods broke off between 75 and 85 k miles. Vehicle has never been off raod or in an accident, there was no indication of failure prior to both incidents.

The vehicle can't be drive forward or reverse because the left inner tie rod end had fallen off, ipon examination of the tie rod end the consumer found that there was no bolt or any other mechanism to hold the two parts together, the consumer believes this is a defective design.

I've had two tie rod break since I've owned this vehicle. (I wasn't sure of the date, so I made one up on the questionaire. I can find out if needed. It was in 1999 but I don't know the exact date the first time it happened)the second time it happened, we could have been killed. We were driving around 60mph down the road, with lots of curves, when all of a sudden the car started going out of control. Like when you get a blowout. I've contacted customer sevice for Ford and she was no help. I'm going to bring the part that broke to my local Ford dealer and see what he can do. Although when I spoke to him on the phone, he told me there probably would be nothing that could be done. I don't use this vehicle harshly and don't understand why the tyrods are breaking. That puts anyone in a life-threatening position and I feel something should be done about this. The Ford dealer that I put on the questionaire might be out of business now so the phone number and address might be incorrect. My local Ford dealer is copper country Ford located in houghton mi.

Consumer heard noise from front of vehicle, went to dealer who found that tie rod end was breaking, replaced at owner's expense.

While driving outer tie rod broke and caused tire to tow, and other tire is just going striaght.

Pulled out of my driveway into traffic with family in vehicle and almost immediately lost all steering control. Tie rod end snapped out (faulty design), replaced with moog brand properly designed outer tie rod. Also the sway bar separated from the truck. This vehicle is not used for any type of "off road" driving, there was no warning before the tie rod went. More than one auto mechanic has told me that Ford is the only auto company that make their tie rods in this manner. There does not seem to be any "safety" feature to the tie rod end to keep it from falling out. I had just been traveling on the interstate at 65 mph two minutes prior to the total loss of vehicle control. We are certainly aware that the mileage on our vehicle warrants some wear and tear, however, these tie rods are just not made properly. Please research the design used and compare to the more appropriately designed moog brand replacements. Also the sway bar is completely unattached from the vehicle on the left front side.

Lost control while turning into an intersection at 5 mph due to driver's side inner tie rod disconnecting. Also, both side sway bar links fell off. Dealer was not contacted.

Drivers side tie rod broke when backing out of garage. Nlm.

While driving at 70 mph left front inner tie rod end broke, causing loss of steering. Manufacturer was notified about the problem. Part was replaced at owner's expense. Ford has provided no assistance.

From Apr-98 to July-98 the NHTSA had investigated tierod-end failures in 96-98 Ford f150, Ford Expeditions and Lincoln navigators. This investigation needs to be re-opened. I believe I have found the reason for the failures. Please have the engineer in charge of this issue call me as soon as posible. This is a major safety issue. Kyle lembach 02-28-99. P. S. I have contacted the NHTSA twice in the past 2 weeks with no response.

Dealer had to tighten and reglue the jam nut to the front left tie rod end and adjust the sleeve, which may cause loss of steering control. . Et.

Vehicle had two sets of front tie rod replacements since November, 1998, and believed that this condition was due to a manufacturer's defect (anti-sway bar link arms). Delaer notified and informed consumer that the 98 vehicle was corrected for that same problem, but nothing was done for owner of 1997 vehicle. Can NHTSA provide additional information or help in this matter.

Tie rod broke causing tire to collaspe inward resulting in damage and loss of control.

Ford motor company contacted--they deny liability--dealer contacted-ignored eye witness statement. Tire snapped off tie rod assembly and caused vehicle to go off road-- no help from the dealership-- accident occured as result of tire snapping off the tie road right at the lock nut joint. There is no evidnece of steel bending. It just shattered.

Threads on the tie rod end that screw into the adjusting sleeve failed, the threads were completely worn out.

Company vehicle. Ie98026; while driving one wheel pointed to right and one to left. When attempting to turn vehicle. Tie rod end became separated from link piece. Dealer contacted, and stated no warranty on vehicle. Repairwork done at owners expense. Provided further information.

Tie rod and adjuster sleeve failed.

While driving inner tie rod failed and snapped apart, preventing any movement of steering wheel. Please give any further details.

Suspension system feels that it does not handle properly, bolt fell out of the front end, after repair front end fell out of the truck due to tie-rod ends pulling apart.