Brake Abs Warning Light problems of the 2009 Ford Fusion

The contact owns a 2009 Ford Fusion. The contact received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic). The contact stated that the abs warning light was illuminated. The vehicle was taken to the local dealer where it was diagnosed with the hydraulic control unit needing to be replaced. The dealer informed the contact that to service the recall, the contact had to first replace the hydraulic control unit. The vehicle was not yet repaired. The manufacturer had been informed of the failure and informed the contact that the vehicle was no longer under warranty. No additional assistance was provided. The failure mileage was approximately 85,000.

The contact owns a 2009 Ford Fusion. The contact received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic) however, the part to do the recall repair was unavailable. The contact took the vehicle to chiefland Ford (916 n. Young blvd, chiefland, FL 32626) and informed the dealer that the abs warning light had illuminated on the instrument panel. Upon inspection of the vehicle, the mechanic informed him that the abs module needed to be replaced and that the replacement was not covered under recall. The manufacturer was made aware of the issue and called the service manager at the dealer. The manufacturer agreed with the dealer and confirmed that the abs module needed to be replaced. No additional assistance was provided. The approximate failure mileage was 12,000. VIN tool confirms parts not available.

Tl the contact owns a 2009 Ford Fusion. The contact stated that the abs warning light had illuminated on the instrument panel. The contact then received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic) however, the part to do the repair was unavailable. The contact recently received another notification that the part for the recall was available. Theodore robins Ford (2060 harbor blvd, costa mesa, CA 92627, (949) 642-0010) was contacted and an appointment was made to have the vehicle serviced. A few hours later, the contact was informed by the dealer that the recall could not be repaired since the abs warning light was illuminated on the instrument panel. The manufacturer was made aware of the failure. The failure mileage was approximately 43,500. Parts distribution disconnect.

This is the second time in the past month my brakes went soft after pulsating to a quick stop (abs I guess kicked in). I took it to a mechanic the first time and he couldn't find anything wrong with the brake system. After he looked at it and did a few things to make abs light come on, they went back to normal. Now it's back, after I had to brake in the snow at a light on the highway. They are back to being spongy and I have to push down further to come to a complete stop.

What I will be describing has happened on more than one occasion: when stopping my vehicle on an uneven surface, my brakes make a whirrring noise and I lose my brakes. Fortunately I have not had to avoid another vehicle or stationary item. Once I ran a stop sign, but it was at a four-way and no other vehicles were present. After this happens my brakes get "squishy". I feel like I have lost 1/2 of my brakes function. I am very careful when stopping and tend to slow much sooner than needed. After a long time it seems like my brakes are "back", but when I have to stop and use the abs we cycle through the same problem. I have taken my vehicle to the local Ford dealer (where I have my car regularly serviced) and I was told that after inspection my brakes look fine. If I want further diagnostics I would have to pay approximately $100 just to "see". A local mechanic told me that unless my abs warning light was on he could not even run the diagnostics. My abs light has never came on.

Tl- the contact owns a 2009 Ford Fusion. The contact stated that while operating the vehicle and pressing the break pedal the abs sensor light was activated. Moments later while attempting to stop the brake pedal extended to the floor, the vehicle did not immediately stop causing the stopping distance to be extended. The vehicle was taken to the dealer who changed the rear rotors and brake pads and brake fluid but the same failure reoccurred several months later. The vehicle was taken back to the dealer who replaced the front brake pads and rotors. The manufacturer was not notified of the failure. The failure mileage was 103,914. Jft.

I was driving and about 15 miles an hour it is raining I was coming up to the slow curve 1 hill my abs light turned on my brakes are locked up made me slide into a curb now my abs light is on and I don't feel comfortable driving my car.

The contact owns a 2009 Ford Fusion. The contact stated that while driving at various speeds, the vehicle experienced delayed brake responses while depressing the brake pedal. The abs warning light was illuminated. The contact then received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 120,000. VIN tool confirms parts not available.