Manual Transmission Floor Shifter problems of the 2013 Ford Fusion

Had been shopping all day, with no indication of a problem. Stopped to gas up vehicle and put the gear shifter in park, then removed the key (no warning or indicator there was a problem). Before exiting the vehicle, when releasing the brake pedal, the car started to roll forward. Brake pedal was immediately pressed again, before possibly colliding with another vehicle parked in front of my vehicle. I put the key back into the ignition to attempt to start the vehicle and it would not start. I looked at the gear indicator and it stated the car was in reverse, but the shifter was in park. Gear shifter override did not change the indicator on the dash either. Vehicle was able to roll forward and backward with gravity or pushing. I kept on the emergency brake and upon inspection of the engine compartment by the mechanic with the tow company, it was discovered that the gear shift cable had disconnected. Reconnection was attempted, but it would not stay connected. There is a current recall for this exact problem, but my VIN number was not included in the recall.

I was moving my car into park as I was pulling into my parking spot and the car went into park with the floor shift and on the dashboard but the car was still in reverse. The floor shirt was stuck and the car was rolling backwards so I put the parking break on. When looking under the hood I noticed the bushing that attaches the shifter cable to the transmission was detached from the transmission. The bushing appears to have been degraded to the point where it could not reattach so I left the parking break on and will need to tow the car. I looked it up and based on my car's manufactured plant, timing, and model there was a recall for this but when I search my VIN it is not coming up so I am wondering if this was missed.