Brake Grinding Noise Problems of Chrysler 200

Chrysler 200 owners have reported 6 problems related to brake grinding noise (under the service brakes category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Chrysler 200 based on all problems reported for the 200.

1 Brake Grinding Noise problem of the 2016 Chrysler 200

Failure Date: 08/24/2020

Tl- the contact's husband owns a 2016 Chrysler 200. The contact stated that while her daughter was driving at various speeds, an abnormal, grinding noise would emit upon depressing the brake pedal without warning. The contact took the vehicle to an independent mechanic where they found no defects with the vehicle. Soon after the inspection, the contact then stated that her daughter had informed her that the oil and the transmission warning lights have appeared on the instrument panel. The contact had called ferman Chrysler Jeep Dodge ram � wesley chapel(24314 FL-54, lutz, FL 33559) where they were informed that a service manager would call them back,, the contact had yet to hear back from the dealer. The manufacturer had yet to be notified of the failure. The vehicle had yet to repaired. The failure mileage was approximately 21,000. Jo.

See all problems of the 2016 Chrysler 200 🔎.

2 Brake Grinding Noise problem of the 2015 Chrysler 200

Failure Date: 05/29/2015

While backing into a driveway the brakes made a loud screech/grinding noise and did not stop as it normally would have causing me to almost back into another vehicle. Chrysler has attempted to repair the vehicle multiple times and the vehicle continues to randomly make this sound and fail to stop normally. The dealership claims that the brakes are performing normally and besides the screech there is no problem with the vehicle.

See all problems of the 2015 Chrysler 200 🔎.

3 Brake Grinding Noise problem of the 2015 Chrysler 200

Failure Date: 05/27/2015

I was driving down road heard a noise when I hit a bump and continue hearing noise when hitting bumps. Then on Saturday morning noticed brake grinding noise then Saturday afternoon when driving home the caliper came off and damaged my rim. When I jacked car up to inspect I noticed the retaining bolts for the caliper missing.

4 Brake Grinding Noise problem of the 2014 Chrysler 200

Failure Date: 03/05/2014

The contact owns a 2014 Chrysler 200. The contact stated that while engaging the brakes, the vehicle made a loud grinding noise. The vehicle was taken to the dealer. The technician was unable to diagnose the failure but decided to replaced the brake pads. The failure recurred. The vehicle was not repaired. The failure mileage was 5,000 and the current mileage was 9,200.

See all problems of the 2014 Chrysler 200 🔎.

5 Brake Grinding Noise problem of the 2012 Chrysler 200

Failure Date: 09/23/2013

I have made several complaints to Chrysler regarding the vehicle not accelerating when it should and not going over 35mph at times. When the vehicle won't accelerate the 6 speed does not work either. Chrysler reset the computer and this worked as a fix for roughly 2 days until it happened again. The vehicle also jumps forward when braking and seems to be jumping very hard through the gears, Chrysler has responded every time that they cannot duplicate the problem and to bring it back when it happens again. Today I was driving to work and again the car was jumping when I was braking. The car in front of me braked hard and unexpectedly therefore I had to as well. My car did not stop! although the brake pedal was pushed as hard as I could the car jumped at least 6 times and made a horrible grinding noise before I finally was able to get it to stop before rear ending the car in front of me. I did make it in to work however, the car did not make any improvements after this, now every time I try to stop the car jumps forward. This car is going to get me, my kids or someone else seriously injured and Chrysler has no sense of urgency to seem to get it fixed. From what I have read it is not only my car that is having the same problem. Add it to the lists of recalls please!!!!! also when I am driving and this happens daily the car jerks very hard between 1st and 2nd gear, this literally causes the car to and feels like it may stall out.

See all problems of the 2012 Chrysler 200 🔎.

6 Brake Grinding Noise problem of the 2011 Chrysler 200

Failure Date: 10/01/2011

When shifting into reverse or drive it has a hard jolt when going into gear. Sometimes it is so hard that it jerks your body and head/neck, and it sounds like the transmission is going to unbolt from under the car. It does it a couple times a day, and then may stop for a few days but always comes back. I have noticed on the days it is not doing it I average more mpg, and when it is doing it the mpg continuously decreases when it is occuring multiple days in a row. On the days that it is doing it my transmission sounds more whiny than than usual. I have also had issues when putting it into gear, and pushing the gas pedal it tries to stall. It is a problem, and not "just the way those motors are". If it was "just the way the motor" is then it would do it every time you put it in gear, and not come and go and be much worse on some days than others. As time passes the jolting is getting worse and harder. Also, my brakes make an awful squeeking/grinding noise when stopping slowly (stop sign) or backing up. When the car was checked I was told they could not find anything wrong with the car or brakes. This is very agrivating because it was bought brand new, and I am having these issues. I am making payments on a vehicle that is having these types of issues, and I do not feel safe in it. The way the transmissions acts I am afraid of what it may do while driving down the road.

See all problems of the 2011 Chrysler 200 🔎.


Other Common Service Brakes related problems of Chrysler 200



Safety Ratings of 200 Cars
Fuel Economy of 200 Vehicles
200 Service Bulletins
200 Safety Recalls
200 Defect Investigations