Dodge RAM owners have reported 5 problems related to power assist brake vacuum hoses, lines/piping, and fittings (under the service brakes category). The most recently reported issues are listed below.
The vehicle vacuum system became contaminated with oil. This effected the vehicle's hav system, brake booster and deteriorated all the vacuum hoses which caused the brakes to fail intermittently. A recall was initiated for this problem but the consumer's vehicle was not included due to VIN. The dealer recommended that the consumer install an external brake booster check valve and hose, replace vent and defroster actuator. The customer declined the repairs.
See
all problems of the 1996 Dodge RAM
🔎.
While driving at any speed vehicle took a long time to slow down when the brake pedal was pressed. Brake light stayed on, and oil was leaking into the vacuum system.
Power vacuum lines failed, causing loss of brakes prior to recall.
Recall #97068, dealer replaced the vacuum check valve in the brake pump in which the problem still exists. The vehicle experiences no braking ability. Had to use the emergency parking brake in order to stop. Consumer states the rubber vacuum fitting on line between pump and brake booster dislodged vacuum, oil fumes reacted to rubber and became unstable, this occurred after recall, all fittings have been replaced with better rubber fittings.
Recall work done on the abs check valve, however loss of brakes and problems with system after recall work. .