Brake Foundation Components Problems of Jeep Grand Cherokee - part 2

When shifting vehicle in reverse it makes a loud noise and vehicle jerks. Dealership replaced tranfer case twice, and rebuiltd the driveshaft. The vehicle would not start due to fuel pump failure. Driver side wiper blade was worn out. Rear differntial was worn, also the rotors were replaced, the fule injection was serviced cleaned the throttle body, power steering fluid was serviced,tires were rotated,pinion bearings, front axles seals replaced.

See all problems of the 1999 Jeep Grand Cherokee 🔎.

While driving and upon applying brakes consumer brakes were vibrating, and the steering wheel wiggling. Consumer has contacted dealer. Dealer surmised that rotors have gone bad, needed replacing.

The front brake pads were replaced and the rotors were turned, the wheel cylinders were replaced twice.

See all problems of the 1998 Jeep Grand Cherokee 🔎.

Brakes failed. Yh.

See all problems of the 2000 Jeep Grand Cherokee 🔎.

Consumer states the front and back brakes wear excessively, without excessive use. Dealer contacted. Consumer adds brakes had to be changed three times within the last three years. Owner of dealership is not willing to do anything.

Rear brake pads and rotors replaced due to pulsating brakes, 6000 miles later, brakes were replaced again because of pulsation, now at 35000 miles the brakes are pulsating again.

While driving there was major braking pulsation, dealer informed consumer the brake and rotors were warped and needee to be replaced, in addition the shoe kit parking brake, shoe kit rear disc brake, brake shoe and lining assembly were replaced, consumer has had 3 sets of brakes and is again experiencing braking pulsation, and is now having to get a fourth set of brakes.

While driving there was major braking pulsation, dealer informed consumer the brake and rotors were warped and needee to be replaced, in addition the shoe kit parking brake, shoe kit rear disc brake, brake shoe and lining assembly were replaced, consumer has had 3 sets of brakes and is again experiencing braking pulsation, and is now having to get a fourth set of brakes.

While driving there was major braking pulsation, dealer informed consumer the brakes and rotors were warped and needed to be replaced, in addition the shoe kit parking brake, shoe kit rear disc brake, brake shoe and lining assembly were replaced, consumer has had 3 sets of brakes and is again experiencing braking pulsation, and is now having to get a fourth set of brakes.

When applying brakes vehicle wobbles as it slows down. Brakes grab and release. Vehicle has been seen 3 times by dealer, but problem still exists. Consumer stated the front rotors and pads were replaced at 9497 miles, and rotors were turned at 15,863 and now vehicle needs brake work again.

No summary listed for above vehicle.

Brakes failed causing front end shimmy. Nlm.

Consumer has had recall, 00v136, work done, however rotors continue to warp, abs module needed repaired, brakes are noisy, brakes pulsate, and abs light illuminates, because of brake problems, tires had to be replaced and have to be rotated often, dealer stated there may be a hazardous condition in the future with the abs.

See all problems of the 1997 Jeep Grand Cherokee 🔎.

Consumer has had recall, 00v136, work done, however rotors continue to warp, abs module needed repaired, brakes are noisy, brakes pulsate, and abs light illuminates, because of brake problems, tires had to be replaced and rotated often, dealer stated there may be a hazardous condition in the future with the abs.

When traveling and upon approaching an intersection, depressed the brake pedal and vehicle continued to maneuver, causing extended stopping distance, and resulting in unwanted acceleration. Consumer has contacted the dealer . Please provide any further details.

See all problems of the 1996 Jeep Grand Cherokee 🔎.

When the brakes are applied they pulsate. Dealer has replaced brakes at 20k miles. The vehicle currently has 38000 miles and problem reoccurred. Manufacturer has been notified.

Brakes failed resulting in an accident. Nlm.

Prior to second recall notification received, the second front rotor failed, however consumer previously had a front rotor replaced and was reimbursed, and now the manufacturer is denying consumer for the second rotor being repaired because they are stating that they have on file that consumer has already been reimbursed for both rotors, conumer is requesting reconsideration for the second rotor, consumer stated the vehicle would vibrate and pull to the left, the dealer replaced both calipers and replaced the rear brake shoes.

Prior to second recall notification received, the second front rotor failed, however consumer previously had a front rotor replaced and was reimbursed, and now the manufacturer is denying consumer for the second rotor being repaired because they are stating that they have on file that consumer has already been reimbursed for both rotors, conumer is requesting reconsideration for the second rotor, consumer stated the vehicle would vibrate and pull to the left, the dealer replaced both calipers and replaced the rear brake shoes.

Driver applied the brakes and the brake pedal went to the floor which caused the vehicle to run into the house.

Driving at approximatly 20 mph ,going down hill , when brakes failed, became inoperative ,causing an accident.

When you step on the brakes car starts to vibrate (only happens on low speed between 20-40 mph).

Rear brakes and rotors failed.

Brakes pulsate causing pulling and steering wheel vibration, replaced pads and rotors, replace all four rotors the second time, scraping noise from rear axle, bad end bearing and cracked skin in rear axle, replaced rear axle gear set.

When turning the wheel left or right there is a grinding noise toward the front underbody. Taken to dealership 3 to 4 times for this problem. The last time, the dealership replaced the drivetrain, front axle and brakes. Consumer still experiencing a minor problem.

Brakes continually require repairs and replacements due to failure causing pulsating. Mjs.

Continued brake problems, several repairs and not able to be completely rectified. Mjs.

Brakes failed.

Traveling over forty miles per hour vehicle veers to the right during certain braking situations. Please provide additional information.

While driving and upon stopping, the vehicle shakes and shimmers erratically. Took to the dealer for repair. Nlm.

Brakes continually require replacement due to wear.

W/rear lock differential and loaded w/other accessories; upon applying brakes, vehicle will pull in either direction. Please describe details. Tt.

Brakes failed prior to the recall. Yh.

Brakes intermittently fail when going over bumpy surfaces. (qcaw).

Vehicle is having many problems with abs and brakes, on one occasion, front brakes locked up, causing skidding and shaking throughout steering wheel, TSB 879 has been complete, rotors have been found warped several times and have been replaced, brake pads have been replaced, pulsation and vibration are felt due to faulty brakes, however dealer can not remedy problem. Torque converter was replaced, consumer states that a noise is in the transmission after driving a while. Engine surges while driving at 55 mph and above.